メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

Nike Flip-Flops are a very common item in a person's wardrobe. Using these Nike Flip-Flops constantly causes wear and tear, which could be dangerous to the person wearing them. As the flip-flops tear they become unstable and can cause foot injuries like a sprained ankle. This guide will help protect you feet, by fixing the torn parts and making the Nike flip-flops more stable.

  1. Remove all rough edges with 120 grit sandpaper from the torn parts of the flip-flop.
    • Remove all rough edges with 120 grit sandpaper from the torn parts of the flip-flop.

  2. Clean off any additional residue with soap, water, and a towel or toothbrush. Allow the flip-flop to air dry before moving on.
    • Clean off any additional residue with soap, water, and a towel or toothbrush.

    • Allow the flip-flop to air dry before moving on.

  3. Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ

    Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ
  4. Gently apply the adhesive on the torn parts of the flip-flop.
    • Gently apply the adhesive on the torn parts of the flip-flop.

    • Make sure the torn parts are completely covered. Overspill is okay.

    • Connect and hold the parts of the flip-flop to the adhesive with your hands for 5 minutes. After the 5 minutes the adhesive will be hard enough to let it sit. Let the adhesive dry for 24 hours.

    • Be sure to wear gloves and be in a ventilated environment when applying the adhesive.

  5. Once the adhesive is dry remove any extra adhesive that might have spilled over with the sandpaper.
    • Once the adhesive is dry remove any extra adhesive that might have spilled over with the sandpaper.

  6. Take the needle and thread and begin to sew a cross stitch from the strap to the torn part of the flip-flop. It may be easier to use an upholstery needle to get through the rubber material. It may be easier to use an upholstery needle to get through the rubber material.
    • Take the needle and thread and begin to sew a cross stitch from the strap to the torn part of the flip-flop.

    • It may be easier to use an upholstery needle to get through the rubber material.

  7. Cover the stitched region with Plasti Dip.
    • Cover the stitched region with Plasti Dip.

    • Allow 4 hours to dry.

    • Make sure to apply the Plastic Dip in a proper environment with venalation or outside.

終わりに

The Nike Flip-Flop(s) are now restored and can be worn again.

5 の人々がこのガイドを完成させました。

Adrian Yearby

メンバー登録日: 2017年07月12日

217 ポイント

1ガイドが承認済み

チーム

Texas Tech, Team S1-G2, Rauch Summer 2017 Texas Tech, Team S1-G2, Rauch Summer 2017人のメンバー

TTU-RAUCH-SU17S1G2

2 メンバー

1のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 18

過去 7 日: 93

過去 30 日: 422

今までの合計 5,725