メインコンテンツにスキップ

How to Resize Pants

必要な工具と部品

  1. How to Resize Pants, How to Resize Pants: 手順 1、 1の画像 1
    • Put on the pants inside out.

  2. How to Resize Pants: 手順 2、 1の画像 1
    • Safety pin the waistband of the pants to the desired fit.

  3. How to Resize Pants: 手順 3、 1の画像 1
    • Pin the outside seam around both hips so that the pants are snug.

  4. How to Resize Pants: 手順 4、 2の画像 1 How to Resize Pants: 手順 4、 2の画像 2
    • Pin down the back seam and inseam so that the pants fit comfortably.

  5. How to Resize Pants: 手順 5、 1の画像 1
    • Take the pants off. Sew the back seam, following your pins.

    • Be careful when operating a sewing machine.

  6. How to Resize Pants: 手順 6、 1の画像 1
    • Put the pants on. Pin the rest of the inseam and the outside seam down both legs.

    • Our preference was to use the skinny jean cut. However, this sewing technique can be applied to any jean cut by simply adjusting the snugness of the fit as you pin.

  7. How to Resize Pants: 手順 7、 1の画像 1
    • Take the pants off. Then, cut off the extra fabric.

    • If you prefer, iron your newly created seams so that they lay open.

  8. How to Resize Pants: 手順 8、 1の画像 1
    • Enjoy your newly fitted pair of pants!

終わりに

After following these steps, you should have properly fitting pants that were ill-fitting before.

18 の人々がこのガイドを完成させました。

作成者

5人の作成者と共同で作成されました。

Haleigh Bingham

メンバー登録日: 09/14/15

503 ポイント

1ガイドが承認済み

チーム

Sam Houston State, Team 15-5, Nardone Fall 2015 Sam Houston State, Team 15-5, Nardone Fall 2015人のメンバー

SHSU-NARDONE-F15S15G5

4 メンバー

6のガイドは作成済み

4 件のコメント

Thank you for this! I have a pair I really like that are huge in the hip and butt. So is it best to pin and make them fit better using the inseam, or the outside seam?

Matt and Amy Crowell - 返信

Thank you, I used your guide for my first time fitting pants; it was absolutely helpful!

Angelica Murillo - 返信

Muy original y más fácil de lo que había visto. A pesar que me defiendo bastante bien con la costura, esto de cambiar de una talla XL a una S, no lo hice nunca en un short, así que gracias por compartir tus conocimientos.

Ros CH - 返信

para que no se deshilen los bordes hay que darle unas puntadas en forma de zig zag a todos los bordes que se cortan.

DAVID MORENO - 返信

コメントを追加

統計データ:

過去 24時間: 19

過去 7 日: 164

過去 30 日: 657

今までの合計 133,299