メインコンテンツにスキップ

How to Replace the Fan Blade Assembly on the Utilitech SFC-1 500B 20 " High Velocity Floor Fan

必要な工具と部品

  1. How to Replace the Fan Blade Assembly on the  Utilitech SFC-1 500B 20 " High Velocity Floor Fan, Fan Blade Assembly: 手順 1、 1の画像 1
    • Unplug fan prior to repair.

    • Remove the Phillips #2 screws securing the fan cover.

  2. How to Replace the Fan Blade Assembly on the  Utilitech SFC-1 500B 20 " High Velocity Floor Fan: 手順 2、 1の画像 1
    • Remove the fan cover.

  3. How to Replace the Fan Blade Assembly on the  Utilitech SFC-1 500B 20 " High Velocity Floor Fan: 手順 3、 1の画像 1
    • Remove the screws holding the plastic wire cover with a Phillips #2 screwdriver and flexible extension.

    • If the above attachment is unavailable, use a crescent wrench or pliers to grip the screwdriver for additional torque.

  4. How to Replace the Fan Blade Assembly on the  Utilitech SFC-1 500B 20 " High Velocity Floor Fan: 手順 4、 1の画像 1
    • Remove the green wire that is attached to the motor housing.

  5. How to Replace the Fan Blade Assembly on the  Utilitech SFC-1 500B 20 " High Velocity Floor Fan: 手順 5、 1の画像 1
    • Remove the nuts securing the motor to the back cover of the fan, using a Phillips #2 screwdriver and an 8mm socket driver.

  6. How to Replace the Fan Blade Assembly on the  Utilitech SFC-1 500B 20 " High Velocity Floor Fan: 手順 6、 1の画像 1
    • Remove the power cord from the back cover by sliding the wire off of the two metal rails holding them together.

  7. How to Replace the Fan Blade Assembly on the  Utilitech SFC-1 500B 20 " High Velocity Floor Fan: 手順 7、 1の画像 1
    • Remove the motor from the back of the fan cover.

  8. How to Replace the Fan Blade Assembly on the  Utilitech SFC-1 500B 20 " High Velocity Floor Fan: 手順 8、 1の画像 1
    • The fan is fully disassembled; replace the damaged parts.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

10人の作成者と共同で作成されました。

EngineeringCorpsman

メンバー登録日: 06/24/15

172 ポイント

1ガイドが承認済み

チーム

Colorado Springs, Team 1-4, Mcmichael SU 2015 Colorado Springs, Team 1-4, Mcmichael SU 2015人のメンバー

UCCS-MCMICHAEL-SU15S1G4

2 メンバー

1のガイドは作成済み

6 件のコメント

do you have the wiring schematics for this fan my wire broke from the copper coil thank you

Timothy Thomas - 返信

My Ulitiech fan suddenly stopped working. What can I do to get it to work again. Or is it my new door stop?

Belinda Blodgett - 返信

Where can I find replacement blades for this fan?

Jason - 返信

My cord on my utilitech floor fan was severed by my table saw and I’ve spliced the cord and it still won’t work. Could there be a reset button or something I’m missing?

Steve Case - 返信

You title this on how to remove the fan blades then don't actually show how to remove the fan blades but get the whole motor with the fan blades attached.

Justin Edgell - 返信

The set screw to remove the fan blade is metric. You will need a set of metric Allen wrenches or metric bits to replace it.

Ed Keough - 返信

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 36

今までの合計 10,115