How to Replace a Croc Ankle Strap Rivet

はじめに

If the rivet or fastener of your Croc has broken off and caused the strap to come loose, follow this guide to repair the issue.

With the significant consumption and disposal of material goods, many people have disposed of damaged Crocs. By using this guide, we can reduce the impact of plastic in landfills.

必要な工具と部品

手順1 Croc Rivet

How to Replace a Croc Ankle Strap Rivet, Croc Rivet: 手順 1、 3の画像 1

How to Replace a Croc Ankle Strap Rivet, Croc Rivet: 手順 1、 3の画像 2

How to Replace a Croc Ankle Strap Rivet, Croc Rivet: 手順 1、 3の画像 3

Use a flathead screwdriver to pry underneath the plastic rivet head.
Wiggle the plastic rivet until the head pops off.

編集

手順2

How to Replace a Croc Ankle Strap Rivet: 手順 2、 3の画像 3

Use your hands to remove the remaining part of the old rivet from inside the Croc.

編集

手順3

How to Replace a Croc Ankle Strap Rivet: 手順 3、 3の画像 3

Flip the Croc strap to the front of the sandal and apply a binder clip to hold the strap in place.

編集

手順4

How to Replace a Croc Ankle Strap Rivet: 手順 4、 3の画像 3

Insert the end of the new rivet through the hole from the inside of the Croc.

編集

手順5

How to Replace a Croc Ankle Strap Rivet: 手順 5、 3の画像 3

Place the head of the new rivet through the hole of the Croc strap.
Move the Croc strap so that the rivet head aligns with the opening of the rivet tail.

編集

手順6

Use a flathead screwdriver to turn the rivet head clockwise to tighten it.

編集

手順7

How to Replace a Croc Ankle Strap Rivet: 手順 7、 3の画像 3

Remove the binder clip.

編集

手順8

How to Replace a Croc Ankle Strap Rivet: 手順 8、 3の画像 3

To test for tightness, move the strap towards the back of the sandal.
If the strap bends instead of rotating freely, the screw is on too tight.
If necessary, to loosen the Croc strap, rotate the rivet head counterclockwise using a flathead screwdriver.