メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

This guide will display how to unlace high top shoes and how to replace them. The Ukrainian lacing pattern will be used, creating two anchored top knots. This design has a set of base knots that make the shoes easy to lace and easy to wear.

  1. Starting with the top eyelets on the right shoe, remove the first two sides of the lace on both sides.
    • Starting with the top eyelets on the right shoe, remove the first two sides of the lace on both sides.

  2. Continue removing the lace from each side’s eyelets until the shoe reaches the last eyelet set.
    • Continue removing the lace from each side’s eyelets until the shoe reaches the last eyelet set.

  3. Remove the entire lace through either the right or left outlet.
    • Remove the entire lace through either the right or left outlet.

  4. Set aside old lace to be recycled or cleaned.
    • Set aside old lace to be recycled or cleaned.

  5. Repeat Steps 1-4 with the left shoe.
    • Repeat Steps 1-4 with the left shoe.

  6. Push the lip of the right shoe downward, so it is flush with the insole.
    • Push the lip of the right shoe downward, so it is flush with the insole.

    • Obtain one new lace.

  7. Find the approximate center of the lace and pinch it between your right index finger and thumb.
    • Find the approximate center of the lace and pinch it between your right index finger and thumb.

  8. Starting from inside the right shoe, place the center of the lace between the center of the top eyelets.
    • Starting from inside the right shoe, place the center of the lace between the center of the top eyelets.

  9. Pull the left end of the lace through the top left eyelet.
    • Pull the left end of the lace through the top left eyelet.

  10. Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ

    Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ
  11. Pull the right end of the lace through the top right eyelet.
    • Pull the right end of the lace through the top right eyelet.

  12. Leave an approx. 4" loop of slack lace at each side of the top eyelets, starting with the left side.
    • Leave an approx. 4" loop of slack lace at each side of the top eyelets, starting with the left side.

  13. Form the right 4" loop.
    • Form the right 4" loop.

  14. Tie a Starting Knot after securing the 4" loops with clips. Start by crossing the left lace over the right.
    • Tie a Starting Knot after securing the 4" loops with clips. Start by crossing the left lace over the right.

  15. Wrap the right lace around the front of the left lace, the right lace should end up at the back of the gap between laces.
    • Wrap the right lace around the front of the left lace, the right lace should end up at the back of the gap between laces.

  16. Pull the right lace through the gap towards the front.
    • Pull the right lace through the gap towards the front.

  17. Pull both ends of the lace to tighten, without removing the 4” loops.
    • Pull both ends of the lace to tighten, without removing the 4” loops.

  18. Pull the lace coming from the left side of the Starting Knot through the second left eyelet towards the inside of the shoe, without removing the 4” loop.
    • Pull the lace coming from the left side of the Starting Knot through the second left eyelet towards the inside of the shoe, without removing the 4” loop.

  19. Pull the lace coming from the right side of the Starting Knot through the second right eyelet towards the inside of the shoe, without removing the 4” loop.
    • Pull the lace coming from the right side of the Starting Knot through the second right eyelet towards the inside of the shoe, without removing the 4” loop.

    • Pull the rightmost lace end across the shoe from the right second eyelet diagonally to the left third eyelet.

    • Pull the leftmost lace end across the shoe from the left second eyelet diagonally to the right third eyelet.

    • Pull both lace ends through the top of the third eyelets.

  20. Repeat steps 16-18 until the last two eyelets are reached.
    • Repeat steps 16-18 until the last two eyelets are reached.

  21. Tie two Stopper Knots on both ends of the lace at the last eyelets. Start by grabbing the right lace end and forming a small loop.
    • Tie two Stopper Knots on both ends of the lace at the last eyelets. Start by grabbing the right lace end and forming a small loop.

  22. Bring the lace end through the back of the loop.
    • Bring the lace end through the back of the loop.

  23. Tighten by pulling on the end of the lace.
    • Tighten by pulling on the end of the lace.

  24. Repeat the Stopper Knot steps with the left lace end.
    • Repeat the Stopper Knot steps with the left lace end.

  25. Tuck the Stopper Knots over the lip and under the eyelets.
    • Tuck the Stopper Knots over the lip and under the eyelets.

    • Ensure the end of the lace is also tucked underneath the eyelets.

  26. Take out the clips holding the top two 4" loops and tie the shoe regularly.
    • Take out the clips holding the top two 4" loops and tie the shoe regularly.

終わりに

To reassemble your sneaker, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Chelsea Carlos

メンバー登録日: 2020年02月04日

469 ポイント

1ガイドが承認済み

チーム

USF Sarasota-Manatee, Team S1-G1, Stewart Spring 2020 USF Sarasota-Manatee, Team S1-G1, Stewart Spring 2020人のメンバー

USFSM-STEWART-S20S1G1

23 メンバー

20のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 14

今までの合計 64