How to Repair a Trophy

はじめに

Over the years, dust, dirt and poor treatment may damage your trophy. This guide will show you how to fix one step-by-step. Trophies are a way of keeping in mind the efforts and sacrifices you've made in a particular sport or hobby. Simple tools that you probably have at home were used to repair this trophy. So if you want to remember some of your achievements and treasure them, I invite you to have fun fixing your most precious trophies.

必要な工具と部品

手順1 How to Repair a Trophy

How to Repair a Trophy, How to Repair a Trophy: 手順 1、 3の画像 1

How to Repair a Trophy, How to Repair a Trophy: 手順 1、 3の画像 2

How to Repair a Trophy, How to Repair a Trophy: 手順 1、 3の画像 3

Put the cylindrical tube on the small threaded rod of the cup.
Turn to the right until you tighten it completely.

編集

手順2

Place the longest threaded rod on the opposite side of the cylindrical tube and twist again to the right until it is tight.

編集

手順3

Put all the pieces on in the correct order.
If you put them on in the wrong order they won't fit.

編集

手順4

Insert the nut into the hub of the 3/8 drive ratchet wrench.
Use the 3/8 inch ratchet wrench to secure the nut at the bottom of the trophy. Turn the nut clockwise until it is fully secure.

編集

手順5

Glue the remaining two pieces to the side of the trophy.
Allow them to dry before touching to prevent them from coming off.

編集

手順6

Wait some time (approximately 30 minutes) until the pieces have dried completely.
And your done!!

編集

終わりに

This work will be completed when all the pieces are tight and without coming off. Remember not to touch the glued pieces too much to avoid breaking them again. I hope you had fun arranging a good memory.