はじめに

Feeling torn as to whether or not you have the skills to repair a blown-out seam in your garment? Fear not. This guide will show you how to repair a rip along a straight seam. In this guide we'll be using contrasting thread for visibility. When it comes time to do your actual project, you'll want to use thread that matches the color of your fabric.

ツール

パーツ

パーツは必要ありません。

  1. Examine the damaged seam in your garment, checking for tears and removing any loose threads.
    • Examine the damaged seam in your garment, checking for tears and removing any loose threads.

    コメントを追加する

  2. Flatten out the garment around the torn seam, and align the fabric where the seam used to be.
    • Flatten out the garment around the torn seam, and align the fabric where the seam used to be.

    • Pin the two layers together. Be sure to catch only the two layers of fabric you wish to sew back together.

    コメントを追加する

    • Open the garment as much as possible, laying the seam flat.

    • Check your alignment and make sure the two edges of your fabric line up.

    • Put the garment in the machine, starting a few inches before the torn seam to overlap with the stitches.

    • Drop the presser foot. Align the first line of stitches with the needle.

    コメントを追加する

  3. Fixmasのスピリットを広めましょう
    クーポンコードFIXMAS12を使えば、50ドル以上のお買い上げで12ドル割引となります。
    Fixmasのスピリットを広めましょう
    クーポンコードFIXMAS12を使えば、50ドル以上のお買い上げで12ドル割引となります。
    • Use the balance wheel to sink the needle into the fabric.

      • Only turn the balance wheel in the direction that advances the machine. Turning the wheel the opposite direction can cause tangling or ruin the tension on the machine.

    コメントを追加する

    • Sew along the first line of stitches, removing the pins before you get to them.

    • If you run over the pins, you risk breaking your needle.

    コメントを追加する

    • When you come to the end of the row of stitches, engage the backstitch function of your machine. Backstitching prevents the seam from unraveling.

      • Backstitch functions vary widely between machines and can come in the form of buttons, levers, and knobs. See your sewing machine manual for instructions on your backstitch function.

    • Depress the pedal slowly. Sew two or three stitches backwards. Release the pedal and disengage the backstitch function.

    コメントを追加する

    • After you've completely sewn over the torn seam, clip the threads and free the garment from the machine.

    コメントを追加する

    • Some clothes have two rows of stitching, If your garment does, reposition it in the sewing machine. Drop the needle into the second line of stitches at about where you began sewing your previous seam.

    • Repeat steps 3-7 of this guide to resew the second line of stitches.

      • You do not need to pin this seam, because the first seam will hold the garment in place.

    • If your garment only has a single line of stitches, skip this step and proceed to the next step.

    コメントを追加する

    • Check that your stitches are straight and secure.

    • Admire your work.

    コメントを追加する

ゴール

2 の人々がこのガイドを完成させました。

Brittany McCrigler

メンバー登録日: 2012年03月05日

80,096 ポイント

132のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Community

111 メンバー

7,293のガイドは作成済み

コメント1件

You will want to put the pins in (if possible to catch all layers) perpendicular to the seam you are sewing. Then you can sew right over them without breaking your needle. Plus you will not poke yourself as they come at you in the line of travel!

AMY - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 11

過去 30 日: 80

今までの合計 2,661