How to Repair a Christmas Tree Light Wire

はじめに

Don't let a broken Christmas tree wire ruin your Christmas spirit. In this guide you will follow step by step instructions on how to save Christmas by repairing your broken Christmas tree wire.

必要な工具と部品

手順1 How to Repair a Christmas Tree Light Wire

How to Repair a Christmas Tree Light Wire, How to Repair a Christmas Tree Light Wire: 手順 1、 1の画像 1

Unplug the lighting.

編集

手順2

Using the wire strippers, split both wires apart approximately one inch.

編集

手順3

Using the wire strippers, strip about an inch of insulation off of each wire.
Use appropriate wire gauge when stripping. A good practice is to start with large gauge and work your way down.

編集

手順4

Twist all four copper strands.
This will make it easier to work with and help prevent fraying.

編集

手順5

Insert the heat shrink tubing on the longer end of your wire.
Once the heat shrink is on your wire, slide it out of your way. We will address the heat shrink in Step 9.

編集

手順6

How to Repair a Christmas Tree Light Wire: 手順 6、 3の画像 3

Cross and twist the wires together to create a connection.
This helps the wires form a better connection when soldering together.

編集

手順7

Solder your wires together by applying heat to the bottom of your wires and solder to the top. The solder will melt onto the copper strands solidifying both wires together.
Burn and fire hazard. Take appropriate precautions and solder in a well-ventilated area.
Pre-heat soldering iron to 325 Fahrenheit.

編集

手順8

Use electrical tape to wrap the soldered wires.
This will prevent both wires from contacting each other.

編集

手順9

Slide the heat shrink over the soldered wires.

編集

手順10

Use your heat source to apply heat to the heat shrink.
Burn and fire hazard.
Apply heat from heat appliance half an inch away from heat shrink.

編集

手順11

Connect your Christmas tree plug into the outlet.

編集

終わりに

You've completed soldering and properly covered any exposed wires being worked on. Connect your cable to an electrical outlet; you're Christmas tree is ready to light once again.