メインコンテンツにスキップ

How to Repair a Bra Underwire

必要な工具と部品

  1. How to Repair a Bra Underwire, How to Repair a Bra Underwire: 手順 1、 1の画像 1
    • Locate the problem: find where the underwire breaks through the fabric of the bra.

  2. How to Repair a Bra Underwire: 手順 2、 2の画像 1 How to Repair a Bra Underwire: 手順 2、 2の画像 2
    • Push the underwire back into the fabric of the side of the cup.

    • When back in place, the wire should not be visible.

  3. How to Repair a Bra Underwire: 手順 3、 1の画像 1
    • Take a piece of matching scrap fabric and cut to the appropriate size.

    • Make sure the fabric is a bit bigger than the wire's puncture hole.

    • If the fabric is too thin, you can fold it to create a thicker piece.

  4. How to Repair a Bra Underwire: 手順 4、 3の画像 1 How to Repair a Bra Underwire: 手順 4、 3の画像 2 How to Repair a Bra Underwire: 手順 4、 3の画像 3
    • Measure the appropriate length of thread and cut it.

    • Thread the needle and pull both ends evenly to double up the thread.

    • Tie the two loose ends of the thread together with a simple knot.

  5. How to Repair a Bra Underwire: 手順 5、 2の画像 1 How to Repair a Bra Underwire: 手順 5、 2の画像 2
    • Place the fabric over the hole. Sew along the perimeter of the fabric square with a simple overlock stitch.

    • An overlock stitch is a sewing technique where the edges of one or more pieces of fabric are sewn together. Watch a short video to learn how to sew the overlock stitch by hand.

    • Make sure to sew through only the patch fabric and the bra's inner fabric layer. The thread should not show at the front of the bra!

  6. How to Repair a Bra Underwire: 手順 6、 3の画像 1 How to Repair a Bra Underwire: 手順 6、 3の画像 2 How to Repair a Bra Underwire: 手順 6、 3の画像 3
    • In the last stitch, leave a loop of tread and pull the needle through the loop.

    • Finish by tying a knot in the end of the tread.

    • Cut the excess thread close to the fabric.

    • Do not cut the thread too close to the knot. This will make the stitches unravel.

  7. How to Repair a Bra Underwire: 手順 7、 2の画像 1 How to Repair a Bra Underwire: 手順 7、 2の画像 2
    • Cut the excess fabric off the finished patch.

    • Inspect the patch to make sure it is securely sewed on the bra.

    • The final product should be a small patch on the inside of the cup.

  8. How to Repair a Bra Underwire: 手順 8、 1の画像 1
    • No damage or evidence of sewing is shown on the outside of the bra.

    • Try on the final product to ensure correct fit and comfort.

終わりに

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

作成者

4人の作成者と共同で作成されました。

Celeste Stoker

メンバー登録日: 04/28/17

213 ポイント

1ガイドが承認済み

チーム

UC Davis, Team S4-G2, Cole Spring 2017 UC Davis, Team S4-G2, Cole Spring 2017人のメンバー

UCD-COLE-S17S4G2

3 メンバー

1のガイドは作成済み

2 件のコメント

You made something that is a total pain in the #$@ not so painful anymore and thanks for adding the video cause that helped a lot

Willow Reignes - 返信

I agree with Wllow. Thank you on behalf of my wife and wallet.

Daniel Pollard - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 53

今までの合計 8,692