メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

I will be teaching end users how to repair old shoe laces without having to buy new ones constantly. This easy guide will have shoelaces looking new within 15 minutes. Follow the simple five steps to improve your laces.

  1. Cut of the excess frayed shoelace.
    • Cut of the excess frayed shoelace.

  2. Slip the entire heat shrink tube over the frayed part of the lace. Make sure to clump the frayed part of the lace together when inserting the tubing. Do not cover too much of the lace that is not frayed with tubing as that could result in unwanted indents in the shoelace.
    • Slip the entire heat shrink tube over the frayed part of the lace.

    • Make sure to clump the frayed part of the lace together when inserting the tubing.

    • Do not cover too much of the lace that is not frayed with tubing as that could result in unwanted indents in the shoelace.

  3. Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ

    Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ
  4. After slipping the tube on, grab the scissors and trim the excess tubing to the length of your satisfaction. Remember not to go beyond the frayed part of the lace with tubing.
    • After slipping the tube on, grab the scissors and trim the excess tubing to the length of your satisfaction.

    • Remember not to go beyond the frayed part of the lace with tubing.

  5. Now use the lighter and heat the heat shrink tube, about an inch away from the lace, until the tube becomes compressed all the way around. Make sure to heat the heat shrink tube all the way around, heating the entire tube When heating, always keep moving the lighter all around and not staying on one part of the tube for too long.
    • Now use the lighter and heat the heat shrink tube, about an inch away from the lace, until the tube becomes compressed all the way around.

    • Make sure to heat the heat shrink tube all the way around, heating the entire tube

    • When heating, always keep moving the lighter all around and not staying on one part of the tube for too long.

  6. Repeat these steps on all the other frayed shoelaces.
    • Repeat these steps on all the other frayed shoelaces.

終わりに

When the heat shrink tube is completely shrunk to appropriate size, you are finished. Repeat steps 1-4 depending on how many frayed laces are present.

13 の人々がこのガイドを完成させました。

Anirudh Jain

メンバー登録日: 2015年04月09日

581 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 28-6, Green Spring 2015 Cal Poly, Team 28-6, Green Spring 2015人のメンバー

CPSU-GREEN-S15S28G6

4 メンバー

8のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 2

過去 7 日: 14

過去 30 日: 102

今までの合計 5,792