メインコンテンツにスキップ

How to Repair Corners of Drywall

必要な工具と部品

  1. How to Repair Corners of Drywall, How to Repair Corners of Drywall: 手順 1、 3の画像 1 How to Repair Corners of Drywall, How to Repair Corners of Drywall: 手順 1、 3の画像 2 How to Repair Corners of Drywall, How to Repair Corners of Drywall: 手順 1、 3の画像 3
    • Measure top and bottom of damaged section.

    • When replacing a corner bead, you must measure at least 1.5 inches from the corner.

    • Use a straight edge between the the top and bottom and draw a straight-line connecting the marking.

    • You can even use the putty knife if the damaged section is not too long.

    • Mark with a pencil, or cut lightly with utility knife.

    • Use caution when using the utility knife as the blade is very sharp and may cause an injury.

  2. How to Repair Corners of Drywall: 手順 2、 2の画像 1 How to Repair Corners of Drywall: 手順 2、 2の画像 2
    • Using your putty knife, dig out of the spackle inside your marking.

    • You need to get down to the metal, or vinyl corner drywall bead.

    • Use caution to not dig too deep.

  3. How to Repair Corners of Drywall: 手順 3、 1の画像 1
    • Unscrew screws in the section of bead that you are going to remove.

    • If it is a vinyl corner bead, then break taped underside with corner of putty knife carefully.

    • Cut the metal corner bead with tin snips.

    • If Vinyl, then use your utility knife.

    • Measure new corner bead and cut.

    • Place new corner bead on corner and fasten in place using screws or tape.

  4. How to Repair Corners of Drywall: 手順 4、 1の画像 1
    • Apply joint compound with a 4 inch putty knife.

    • The more compound the better. It will shrink while drying.

    • Do not worry about getting corners the perfect.

    • Dry for 12 hours.

  5. How to Repair Corners of Drywall: 手順 5、 3の画像 1 How to Repair Corners of Drywall: 手順 5、 3の画像 2 How to Repair Corners of Drywall: 手順 5、 3の画像 3
    • Sand area with 80 grit sandpaper.

    • Wipe down with damp cloth, sponge, or paper towel.

    • Be careful to not wet down the patch with too much water. Only minimum amount of dampness needed to wipe away sanding dust.

    • Apply thinner coat of joint compound with a 6, or 8 inch putty knife.

    • Pay attention to put pressure on the outside edge.

    • Let dry for 2 hours.

  6. How to Repair Corners of Drywall: 手順 6、 1の画像 1
    • Sand the area with 120 grit sandpaper.

    • If needed, repeat Step 5 again.

    • Paint the patched area to match wall

終わりに

Now the corner drywall is ready to be painted and match the rest of the room.

ある他の人がこのガイドを完成しました。

作成者

2人の作成者と共同で作成されました。

Michael Cioffi

メンバー登録日: 04/08/19

160 ポイント

1ガイドが承認済み

チーム

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 32

過去 30 日: 100

今までの合計 20,150