How to Reinforce a Cowboy Boot Heel

はじめに

Having the heels of your boots torn off can be extremely frustrating. Cowboy boots go through extensive wear especially because they are typically worn for physical work rather than a fashion statement. It is natural to have your boots deteriorate over time and it is recommended to repair and reinforce damaged parts as soon as possible.

If you or someone you know have a broken heel on a cowboy boot, this guide details a step-by-step process of properly repairing an unstable heel. Cheap, fast, and effective, our guide ensures an affordable and functional method for fixing your boots.

必要な工具と部品

手順1 How to Reinforce a Cowboy Boot Heel

How to Reinforce a Cowboy Boot Heel, How to Reinforce a Cowboy Boot Heel: 手順 1、 2の画像 1

How to Reinforce a Cowboy Boot Heel, How to Reinforce a Cowboy Boot Heel: 手順 1、 2の画像 2

Identify and assess the damage on the heel of your cowboy boot.

編集

手順2

Take a piece of sandpaper and sand down the inside of the broken heel.
This will allow the glue to adhere to a smooth surface.

編集

手順3

How to Reinforce a Cowboy Boot Heel: 手順 3、 3の画像 3

Apply a small amount of Shoe Goo to the paintbrush.
Use the paintbrush to apply the glue on the inside of the broken heel.
Shoe Goo contains strong chemicals that are unsafe to inhale in large quantities.

編集

手順4

Hold and apply pressure to the boot with your hands for at least 5 minutes.
Wait an additional 5 minutes for the glue to dry.

編集

手順5

How to Reinforce a Cowboy Boot Heel: 手順 5、 3の画像 3

Measure the length of each side of the heel with the leather strip.
Cut two pieces of leather using scissors corresponding to the measured length of the right and left side of the heel.
If the leather strips are too thick, cut the measured leather strips vertically in half for thinner strips.

編集

手順6

How to Reinforce a Cowboy Boot Heel: 手順 6、 3の画像 3

Apply glue to the leather strip with the paint brush.
Place the strip on one side of the boot along the heel.

編集

手順7

Apply glue to the other leather strip.
Place the strip onto the other side of the boot, so that both pieces meet at the back.
These leather strips will reinforce and protect your heel from detaching again in the future.