How to Make Jeans Fitted

リペアコミュニティに参加 - アカウントの作成

はじめに

Big and baggy jeans can be reused rather than thrown away. Some individuals tend to lose weight as well, and can repair their jeans to their new size. Other individuals may have “mom-jeans” or old jeans that they would like to wear. Overall, jeans can be expensive to buy. By using jeans that individuals already have, this guide can show them how to personally take those jeans and adjust them to their desired fitting. It is assumed that the jeans fit your waist and hips, as this guide is for adjusting the leg area.

必要な工具と部品

手順1 How to Make Jeans Fitted

How to Make Jeans Fitted, How to Make Jeans Fitted: 手順 1、 2の画像 1

How to Make Jeans Fitted, How to Make Jeans Fitted: 手順 1、 2の画像 2

Lay jeans out on a table.
Table must have enough space to lay out jeans.

翻訳

FixBotに聞いてみる

手順2

Flip jeans inside out.

翻訳

FixBotに聞いてみる

手順3

Identify the outer seam on both right and left sides.

翻訳

FixBotに聞いてみる

手順4

Put on the jeans inside out.

翻訳

FixBotに聞いてみる

手順5

Pin the amount of fabric you would like taken in on the outer sides. Mark where the pins are using a marker/pen.
Pins should be about an inch apart for an accurate measurement.

翻訳

FixBotに聞いてみる

手順6

Connect the dots to make a clear guide to cut off.
Double check if you are satisfied with the amount that will be taken off.

翻訳

FixBotに聞いてみる

手順7

Take a pair and scissors and cut along the guide (or markings) that you made on both sides.
When cutting your jeans it is always better to cut less as opposed to too much as you can always go back and make it smaller.

翻訳

FixBotに聞いてみる

手順8

Align edges, and make sure they are even before you start sewing.

翻訳

FixBotに聞いてみる

手順9

Hold the edges together and sew.
Sew the seam about 1/4-1/2 of an inch away from the edge. This will ensure that that the seam will not unravel if there is any fringe
Your stitches should be 1/2 cm in length or less to ensure a strong seam.