メインコンテンツにスキップ

はじめに

This guide will walk you through the quick and simple process of assembling a Mac Pro First Generation Hard Drive Sled Adapter. The existing hard drive bay sled brackets in this device are meant to fit 3.5" hard drives, but this adapter enables you to install any SATA 2.5" solid state, hybrid, or standard hard drive. It also correctly aligns the SATA connector to match the socket in your Mac Pro.

  1. Insert the two tabs on the left side of the metal adapter bracket into the slots on the left side of the hard drive bay sled. Align the holes on the right side. Align the holes on the right side.
    • Insert the two tabs on the left side of the metal adapter bracket into the slots on the left side of the hard drive bay sled.

    • Align the holes on the right side.

  2. Screw the two 7.8mm PH0 screws into the two holes on the right.
    • Screw the two 7.8mm PH0 screws into the two holes on the right.

    • Leave these screws slightly loose; they will be tightened once the hard drive is attached.

  3. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  4. Align the holes in the hard drive with the three holes on the bracket. Screw the three 6.1mm PH0 screws into the bracket and hard drive. These screws can be secured tightly.
    • Align the holes in the hard drive with the three holes on the bracket.

    • Screw the three 6.1mm PH0 screws into the bracket and hard drive.

    • These screws can be secured tightly.

  5. Tighten the two 7.8mm PH0 screws on the right side of the bracket.
    • Tighten the two 7.8mm PH0 screws on the right side of the bracket.

ゴール

Kristen Gismondi

メンバー登録日: 2014年11月12日

21,640 ポイント

9のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Community

101 メンバー

8,661のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 41