メインコンテンツにスキップ

How to Fix a Sticking Deadbolt

必要な工具と部品

  1. How to Fix a Sticking Deadbolt, How to Fix a Sticking Deadbolt: 手順 1、 2の画像 1 How to Fix a Sticking Deadbolt, How to Fix a Sticking Deadbolt: 手順 1、 2の画像 2
    • Use a Phillips screwdriver to remove both of the ¾-inch screws from the strike plate.

  2. How to Fix a Sticking Deadbolt: 手順 2、 2の画像 1 How to Fix a Sticking Deadbolt: 手順 2、 2の画像 2
    • Remove both of the 2.5 inch mounting screws from the lock cylinder.

  3. How to Fix a Sticking Deadbolt: 手順 3、 1の画像 1
    • After all four screws have been taken out, slide the latch of the deadbolt out of the door frame.

  4. How to Fix a Sticking Deadbolt: 手順 4、 2の画像 1 How to Fix a Sticking Deadbolt: 手順 4、 2の画像 2
    • Spray GumOut parts cleaner at an angle into the latch of the deadbolt.

    • Use a rag to clean and dry off latch.

    • We suggest using GumOut cleaning solutions, which is available at most home improvement stores.

  5. How to Fix a Sticking Deadbolt: 手順 5、 1の画像 1
    • Spray GumOut parts cleaner into the key cylinder to lubricate chamber.

  6. How to Fix a Sticking Deadbolt: 手順 6、 2の画像 1 How to Fix a Sticking Deadbolt: 手順 6、 2の画像 2
    • Insert dry powdered graphite into the key cylinder of the deadbolt.

    • Place the key into the cylinder to lubricate and clean the chamber.

    • If it is difficult to turn the key, then apply more dry powdered graphite into the cylinder.

  7. How to Fix a Sticking Deadbolt: 手順 7、 2の画像 1 How to Fix a Sticking Deadbolt: 手順 7、 2の画像 2
    • Apply the dry powdered graphite to the latch of the deadbolt.

    • Use a rag to remove excess dry powdered graphite from the latch.

  8. How to Fix a Sticking Deadbolt: 手順 8、 1の画像 1
    • Slide the latch of the deadbolt back into the door frame.

  9. How to Fix a Sticking Deadbolt: 手順 9、 3の画像 1 How to Fix a Sticking Deadbolt: 手順 9、 3の画像 2 How to Fix a Sticking Deadbolt: 手順 9、 3の画像 3
    • Take the lock cylinder and the 2.5 inch mounting screws and insert them through the latch of the deadbolt.

    • Then mount the key cylinder on the screws.

    • Use a Phillips screwdriver to tighten the 2.5 inch mounting screws and secure the deadbolt to the frame.

    • The cylinder should be mounted on the outside of the doorframe.

  10. How to Fix a Sticking Deadbolt: 手順 10、 1の画像 1
    • Use a Phillips screwdriver to screw in both of the ¾-inch screws back into the strike plate.

終わりに

After following this fast fix guide, the sticking deadbolt should be fixed.

5 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

Elizabeth Nesler

メンバー登録日: 02/23/16

214 ポイント

1ガイドが承認済み

チーム

Texas Tech, Team 22-5, Rauch Spring 2016 Texas Tech, Team 22-5, Rauch Spring 2016人のメンバー

TTU-RAUCH-S16S22G5

3 メンバー

1のガイドは作成済み

コメント 1 件

GumOut Cleaner seems to be initially intended for Brakes and other auto parts. Is that the product you intend?

dan - 返信

コメントを追加

統計データ:

過去 24時間: 7

過去 7 日: 37

過去 30 日: 156

今までの合計 38,947