はじめに

This guide will show you how to repair a correcting tape within a few steps and make a full used of it.

パーツ

パーツは必要ありません。

  1. From the button, open the case of the correcting tape. From the button, open the case of the correcting tape.
    • From the button, open the case of the correcting tape.

  2. Cut from the middle of the extra correcting tape and remove those used parts. Cut off those used parts from the place near the small gear.
    • Cut from the middle of the extra correcting tape and remove those used parts.

    • Cut off those used parts from the place near the small gear.

  3. Cut a small piece of the scotch tape.
    • Cut a small piece of the scotch tape.

  4. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  5. Connect the remaining correction tape to the small gear by using a small piece of scotch tape.
    • Connect the remaining correction tape to the small gear by using a small piece of scotch tape.

  6. After the connection is made, wrap the used tape tightly around the gear.
    • After the connection is made, wrap the used tape tightly around the gear.

    • Put all the parts back in place.

  7. Close the case of the correcting tape and snap back to place.
    • Close the case of the correcting tape and snap back to place.

  8. You're done!
    • You're done!

まとめ

To reassemble your device, follow these instructions in reverse order.

Yi Luo

メンバー登録日: 2018年10月26日

145 ポイント

1ガイドが承認済み

チーム

UC Davis, Team S2-G5, Bender Fall 2018 UC Davis, Team S2-G5, Bender Fall 2018人のメンバー

UCD-BENDER-F18S2G5

2 メンバー

1のガイドは作成済み

統計データを表示:

過去 24時間: 9

過去 7 日: 26

過去 30 日: 81

今までの合計 192