How to Connect LED Strip Lights

はじめに

LED lights often don’t come with connectors and offer no way to connect them in a series to continues one strand. This guide shows exactly how to complete the steps to hang these on your wall connected in a series. This guide is useful for individuals who may purchase multiple sets of lights from different brands or the same brand that may not come with the correct connections. Often times, you receive two light strands with no way to connect them in sequence.

必要な工具と部品

手順1 How to Connect LED Strip Lights

How to Connect LED Strip Lights, How to Connect LED Strip Lights: 手順 1、 2の画像 1

How to Connect LED Strip Lights, How to Connect LED Strip Lights: 手順 1、 2の画像 2

Attach one strand of lights using the pre applied glue or a hot glue gun where you desire.
Make sure you leave a little slack at the end of the strand to connect to the second strand of lights.

編集

手順2

Find the other side labeled RGB with prongs and/or wires and repeat the process from Step 1.
Leave slack on the end to reach the other strand.

編集

手順3

Once you determine which side you have ended with (either prong side or plate side), you will then determine which set of RGB labeled plates you will connect to.

編集

手順4

Using the prong side make sure both sides line up “RGB” to “RGB” on both sides.
Place each prong so it coordinates with the correct opposite plate.
Push towards the wall into the plate using the prongs and make a firm connection.

編集

手順5

Using tape or hot glue firmly secure the center of the connection to the wall or desired area making sure there is little movement in the wires.
Try and avoid gluing the metal plates. You may cut off connection from your prongs if not careful.

編集

手順6

How to Connect LED Strip Lights: 手順 6、 3の画像 3

Turn on the light strip to make sure all the lights come on. Test to see if the colors change to make sure they all look correct and match each other.
If they do not work correctly restart from step two.

編集