メインコンテンツにスキップ

How to Clean a Canon PowerShot SD780 IS Shutter Button

必要な工具と部品

  1. How to Clean a Canon PowerShot SD780 IS Shutter Button, How to Clean a Canon PowerShot SD780 IS Shutter Button: 手順 1、 1の画像 1
    • Before starting, make sure to turn off the camera and remove the battery.

  2. How to Clean a Canon PowerShot SD780 IS Shutter Button: 手順 2、 1の画像 1
    • Using a Phillips #00 screwdriver, remove the five outermost screws from the camera.

  3. How to Clean a Canon PowerShot SD780 IS Shutter Button: 手順 3、 1の画像 1
    • Remove the front panel of the camera case to expose the top left ribbon cable. Pull the ribbon cable gently to disconnect it from the camera.

  4. How to Clean a Canon PowerShot SD780 IS Shutter Button: 手順 4、 1の画像 1
    • Using a Phillips #00 screwdriver remove the single screw on the far left-hand side towards the bottom of the camera.

  5. How to Clean a Canon PowerShot SD780 IS Shutter Button: 手順 5、 1の画像 1
    • Carefully pull the case apart to separate the 2 pieces.

    • The case will detach from the camera in two pieces.

  6. How to Clean a Canon PowerShot SD780 IS Shutter Button: 手順 6、 1の画像 1
    • Remove the two screws on the metal plate of the camera case. This will give you access to the spring inside the metal plate for further cleaning.

    • Clean the inside of the camera with a cloth to remove dust and excess grime. This should unstick the shutter button and allow for full function.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

8人の作成者と共同で作成されました。

Arlene Ale

メンバー登録日: 03/13/14

455 ポイント

4のガイドは作成済み

チーム

New Mexico State, Team 1-5, Easley Spring 2014 New Mexico State, Team 1-5, Easley Spring 2014人のメンバー

NMSU-EASLEY-S14S1G5

2 メンバー

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 13

過去 30 日: 16

今までの合計 833