メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

Over time debris can build up on the print head nozzle causing irregular flow resulting in poor print quality.

  1. The printer needs to be on in order to change the ink cartridges.
    • The printer needs to be on in order to change the ink cartridges.

  2. To locate the ink cartridges the paper output tray must be in the lowered position. Next lift the scanning unit until the scanning support is vertical. Lower the scanning unit until the scanning unit support seats in the scanning unit support slot.
    • To locate the ink cartridges the paper output tray must be in the lowered position.

    • Next lift the scanning unit until the scanning support is vertical.

    • Lower the scanning unit until the scanning unit support seats in the scanning unit support slot.

  3. Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ

    Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ
  4. Allow the printer to position the ink cartridge carrier into the ink cartridge removal location. Before replacing the ink cartridge ensure the correct ink cartridge is installed. Push down on the front edge of the ink cartridge.
    • Allow the printer to position the ink cartridge carrier into the ink cartridge removal location.

    • Before replacing the ink cartridge ensure the correct ink cartridge is installed.

    • Push down on the front edge of the ink cartridge.

    • Observe the angle at which the ink cartridge is removed.

    • Grasp ink cartridge and pull up and out to remove.

  5. Hold the ink cartridge with the ink nozzle facing up. Using a paper towel firmly wipe the entire ink nozzle. Repeat until the nozzle appears free of any ink and debris. Repeat until the nozzle appears free of any ink and debris.
    • Hold the ink cartridge with the ink nozzle facing up. Using a paper towel firmly wipe the entire ink nozzle.

    • Repeat until the nozzle appears free of any ink and debris.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Garret Wescott

メンバー登録日: 2014年10月23日

591 ポイント

4のガイドは作成済み

チーム

Michigan Tech, Team 1-5, Lauer Fall 2014 Michigan Tech, Team 1-5, Lauer Fall 2014人のメンバー

MTU-LAUER-F14S1G5

3 メンバー

5のガイドは作成済み

コメント1件

is ther an easy way to gain access to the roller at the rear of the machine to clean it

hope342 - 返信

コメントを追加

統計データを表示:

過去 24時間: 2

過去 7 日: 6

過去 30 日: 49

今までの合計 3,580