はじめに
Hi everyone, in this guide, I'll show you how to calibrate the gimbal camera on the DJI Mini 3 Pro drone.
Download links
Python: https://www.python.org/
PySerial: https://pypi.org/project/pyserial/#files
Github: https://github.com/o-gs/dji-firmware-too...
7-zip: https://7-zip.org/
Script to start calibration
Step 1: py comm_og_service_tool.py --port com pcode GimbalCalib JointCoarse
Step 2: py comm_og_service_tool.py --port com pcode GimbalCalib LinearHall
As of 28 Dec 2022, DJI Firmware Tools does not support the Mini 3 Pro
ビデオインストラクション
もう少しです！
To reassemble your device, follow these instructions in reverse order.
終わりに
To reassemble your device, follow these instructions in reverse order.
ある他の人がこのガイドを完成しました。
20 件のコメント
The software doesn't list mini 3 pro as one of the supported drones. How to go about it?
Rakesh Menon - 返信
waiting for software update
Arty -
I have seen posts where people have used code from Mavic mini 1st series to mini 2 or mini SE and the calibration process was successful.
Arty -
This guide is not suitable for Mini 3 Pro. For now, it's impossible to recalibrate the gimbal on Mini 3 Pro without specialized authorized software.
Anton - 返信
Mavic 3 is already supported, probably Mini 3 will be supported in the next update.
Arty -