はじめに

The video below details how to wirelessly transfer data from your previous 2DS/3DS systems to the New 3DS XL. If you'd prefer to do a physical transfer, our guide will show you how to manually transfer the data off of your old 2DS/3DS SD card onto the microSD card of the New 3DS XL.

パーツ

パーツは必要ありません。

ビデオの概要

  1. Start by removing the stylus from the frame of the New 3DS XL.
    • Start by removing the stylus from the frame of the New 3DS XL.

  2. Loosen the two captive Phillips #1 screws on the back of the device.
    • Loosen the two captive Phillips #1 screws on the back of the device.

      • These captive screws will conveniently stay in the rear cover, so don't try to remove them.

    • Prying from the thumb slots on each side, pull the rear panel off the back of the device.

    • Press the microSD card slightly deeper into its slot until you hear a click.

    • After the click, release the card and it will pop out of its slot.

    • Use a PC to copy the data from the source SD card to the New 3DS XL microSD card.

    • For reassembly, push the microSD card into the slot until it clicks in place.

まとめ

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Geoff Wacker

メンバー登録日: 2013年09月30日

73,687 ポイント

84のガイドは作成済み

統計データを表示:

過去 24時間: 2

過去 7 日: 5

過去 30 日: 34

今までの合計 2,651