修理を始めるには コミュニティ ストア

How Fix Rattle in Aftershokz Trekz Titanium Headphones

はじめに

Before the repair, the speaker literally rattled like a bean in a pod— if I shook the headset I could feel it rattling. I preemptively repaired the other side too. Neither side rattles now at full volume, and the microphone works too.

必要な工具と部品

  1. How Fix Rattle in Aftershokz Trekz Titanium Headphones, mark the location for a glue port: 手順 1、 1の画像 1

    • Using an awl or drift punch, mark a central location above the back of the speaker.

    • This step centers the drill bit so it doesn't wander.

    • The exact location is not critical, as the speaker fills most of the cavity. This port will be filled with glue, so maintain some distance from the control button.

    編集

  2. How Fix Rattle in Aftershokz Trekz Titanium Headphones, Drill a small glue port: 手順 2、 1の画像 1

    • Gently by hand using a small twist bit, cleanly penetrate the plastic case. Stop when metal is visible.

    • There is an air-gap between the case and the back of the speaker.

    編集

  3. How Fix Rattle in Aftershokz Trekz Titanium Headphones: 手順 3、 1の画像 1

    • Optionally ream the mouth of the glue port.

    • I used a countersink. Generally an oversized twist bit can serve the purpose.

    編集

  5. How Fix Rattle in Aftershokz Trekz Titanium Headphones: 手順 4、 1の画像 1

    • apply a single drop of glue

    • Here I successfully used Gorilla Glue. Other glue or epoxy products have been used by others. The objective is to fill in behind the speaker and/or adhere the flange of the speaker to the cup.

    編集

  6. How Fix Rattle in Aftershokz Trekz Titanium Headphones, Fill behind the speaker with glue/epoxy: 手順 5、 1の画像 1

    • work the adhesive into the glue port for example using a toothpick.

    編集

  7. How Fix Rattle in Aftershokz Trekz Titanium Headphones, Remove excess adhesive: 手順 6、 1の画像 1

    • clean up any excess glue or epoxy.

    編集

  8. How Fix Rattle in Aftershokz Trekz Titanium Headphones, Seal as necessary: 手順 7、 1の画像 1

    • Gorilla glue can foam, so I taped over the glue port temporarily while the glue dried overnight.

    編集
ゴール

3 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Student4Life

メンバー登録日: 05/27/17

2,613 ポイント

7のガイドは作成済み

バッジ: 14

+11 個以上のバッジ

2 件のコメント

Plz how to cornet wire to d panel plz diagram

kca - 返信

Aftershock panel ( Diagram)

kca - 返信

コメントを追加

統計データ:

過去 24時間: 4

過去 7 日: 44

過去 30 日: 171

今までの合計 7,975