Hover-1 Maverick Motherboard Replacement - iFixit 修理ガイド

はじめに

This guide for the Hover-1 Maverick guides users in replacing the motherboard in their device. The motherboard is crucial within the hoverboard. It controls all functions and acts as a medium for communication between parts in the device. Symptoms of having a faulty motherboard include the device being unable to balance, unable to hold a charge, has flashing lights, or has trouble powering on. Users need to disconnect the battery and the wires in order to replace the motherboard.

必要な工具と部品

手順1 Motherboard

Hover-1 Maverick Motherboard Replacement, Motherboard: 手順 1、 3の画像 1

Hover-1 Maverick Motherboard Replacement, Motherboard: 手順 1、 3の画像 2

Hover-1 Maverick Motherboard Replacement, Motherboard: 手順 1、 3の画像 3

Remove the twenty 15mm Phillips #1 screws from the shell of the hoverboard.
Open the shell.
There is one motherboard on each side of the device located near the wheels.

手順2

Hover-1 Maverick Motherboard Replacement: 手順 2、 2の画像 1

Hover-1 Maverick Motherboard Replacement: 手順 2、 2の画像 2

Disconnect the battery to prevent any electrical currents from coming through the wires.

手順3

Hover-1 Maverick Motherboard Replacement: 手順 3、 2の画像 1

Hover-1 Maverick Motherboard Replacement: 手順 3、 2の画像 2

Squeeze and pull on the wires to detach them from the motherboard.

手順4

Hover-1 Maverick Motherboard Replacement: 手順 4、 2の画像 1

Hover-1 Maverick Motherboard Replacement: 手順 4、 2の画像 2

Remove the four 8mm Phillips #1 screws.
Remove the motherboard from the device.
Repeat for the other motherboard.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

4人の作成者と共同で作成されました。

Cassandra Aarrestad

メンバー登録日: 01/23/20

627 ポイント

4のガイドは作成済み

+6 個以上のバッジ

チーム

Cal Poly, Team S7-G2, Paton Spring 2020 Cal Poly, Team S7-G2, Paton Spring 2020人のメンバー

CPSU-PATON-S20S7G2

3 メンバー

5のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 4

過去 7 日: 9

過去 30 日: 30

今までの合計 2,294