Hover-1 Folding E-Scooter Brake Switch Replacement

はじめに

This guide is designed to help you replace a broken or damaged brake switch. All you will need is a #0 and #2 Phillips screwdriver to remove the screws in this guide

必要な工具と部品

手順1 Brake Switch

Hover-1 Folding E-Scooter Brake Switch Replacement, Brake Switch: 手順 1、 1の画像 1

Twist the handle with the red level counterclockwise to remove it from the scooter's main body.
You will need to twist the handle clockwise reattach it to the scooter's main body.

翻訳

手順2

Remove the four 5 mm screws twisting counterclockwise with a Phillips #0 screwdriver.
These screws are small and easy to lose.
When inserting for reassembly the screws twist clockwise to secure.

翻訳

手順3

Hover-1 Folding E-Scooter Brake Switch Replacement: 手順 3、 3の画像 3

Remove the red brake switch by sliding it off the main body.
When putting the brake switch back make sure to align the tab with the throttle switch.

翻訳

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

1人の作成者と共同作成されました。

Brittani Kealoha

メンバー登録日: 10/08/18

251 ポイント

1ガイドが承認済み

バッジ: 8

+5 個以上のバッジ

チーム

Cal Poly, Team S15-G5, White Fall 2018 Cal Poly, Team S15-G5, White Fall 2018人のメンバー

CPSU-WHITE-F18S15G5

4 メンバー

5のガイドは作成済み

6 件のコメント

Do you know where I can find just the handle? They sent me a L and R but the L was stripped and won't screw in and the R will screw into both sides so I need either a L or R at this point I don't care i just can't find one and its “out of warranty”

Angela Renteria - 2020年5月13日返信