このバージョンは誤った内容を含んでいる可能性があります。最新の承認済みスナップショットに切り替えてください。
必要な工具と部品
-
-
この手順は未翻訳です。 翻訳を手伝う。
-
Locate the five solder locations on the underside of the gyroscope sensor board.
-
Plug in soldering iron and wait for the tip tip to reach its target temperature.
-
Rest the tip of the iron on the solder and wait for the solder to melt. The wire will drop out of the sensor board.
-
もう少しです!
ゴール