メインコンテンツにスキップ

Hoover LiNX Power Button Replacement

必要な工具と部品

  1. Hoover LiNX Power Button Replacement, Hoover LiNX Handle Teardown: 手順 1、 1の画像 1
    • Remove the single 15mm Phillips #1 screw from the handle.

  2. Hoover LiNX Power Button Replacement: 手順 2、 1の画像 1
    • Remove the handle by pulling it up.

  3. Hoover LiNX Power Button Replacement: 手順 3、 1の画像 1
    • Remove two 15mm Phillips #1 screws from the handle.

  4. Hoover LiNX Power Button Replacement: 手順 4、 2の画像 1 Hoover LiNX Power Button Replacement: 手順 4、 2の画像 2
    • Use a plastic opening tool to carefully pry the black cover off of the handle.

  5. Hoover LiNX Power Button Replacement: 手順 5、 2の画像 1 Hoover LiNX Power Button Replacement: 手順 5、 2の画像 2
    • Remove five 15mm Phillips #1 black screws from the handle.

  6. Hoover LiNX Power Button Replacement: 手順 6、 2の画像 1 Hoover LiNX Power Button Replacement: 手順 6、 2の画像 2
    • Remove the silver plastic cover using the plastic opening tool.

  7. Hoover LiNX Power Button Replacement, The Motherboard Inside The Handle: 手順 7、 1の画像 1
    • Remove the black rubber cover from the motherboard.

  8. Hoover LiNX Power Button Replacement: 手順 8、 1の画像 1
    • Remove two 8mm Phillips #1 screws from the motherboard.

  9. Hoover LiNX Power Button Replacement: 手順 9、 2の画像 1 Hoover LiNX Power Button Replacement: 手順 9、 2の画像 2
    • Carefully pull the motherboard out with its attached wires.

  10. Hoover LiNX Power Button Replacement, Power Button: 手順 10、 2の画像 1 Hoover LiNX Power Button Replacement, Power Button: 手順 10、 2の画像 2
    • Replace the power button.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Mark Nelson

メンバー登録日: 01/25/18

452 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team S7-G4, Passmore Spring 2018 USF Tampa, Team S7-G4, Passmore Spring 2018人のメンバー

USFT-PASSMORE-S18S7G4

4 メンバー

12のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 14

今までの合計 1,219