はじめに

After removing the outer casing, replacing the fan blades is quick and easy! You would want to use this guide to replace the broken part or clean dirty blades.

Remove the four 14 mm screws  from the back of the device using the Phillips #0 Screwdriver. Remove the four 14 mm screws  from the back of the device using the Phillips #0 Screwdriver.
  • Remove the four 14 mm screws from the back of the device using the Phillips #0 Screwdriver.

コメントを追加する

Pull the front and back parts of the case away from each other until the back is free from the front. This may require a large amount of force. Pull the front and back parts of the case away from each other until the back is free from the front. This may require a large amount of force.
  • Pull the front and back parts of the case away from each other until the back is free from the front. This may require a large amount of force.

コメントを追加する

Remove the hex nut from the fan motor with a 10mm hexagonal ratcheting socket wrench. The nut uses a left-handed thread.
  • Remove the hex nut from the fan motor with a 10mm hexagonal ratcheting socket wrench.

  • The nut uses a left-handed thread.

コメントを追加する

Grasp the fan blade firmly and pull upward to remove it from the center column of the fan. The slots on the fan blades and center column need to be aligned for reassembly.
  • Grasp the fan blade firmly and pull upward to remove it from the center column of the fan.

  • The slots on the fan blades and center column need to be aligned for reassembly.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Jenna Johnson

メンバー登録日: 2014年10月14日

235 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 10-40, Amido Fall 2014 Cal Poly, Team 10-40, Amido Fall 2014人のメンバー

CPSU-AMIDO-F14S10G40

3 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 3

過去 7 日: 18

過去 30 日: 114

今までの合計 1,719