Homedics UHE-CMP15 Battery Replacement

はじめに

If you believe the battery in your device may be faulty, follow this guide to access the battery compartment. For this guide, you will need a thin Phillip's head screwdriver, tweezers, and a soldering iron once you get to the battery itself.

必要な工具と部品

手順1 Battery

Homedics UHE-CMP15 Battery Replacement, Battery: 手順 1、 1の画像 1

Make sure your device is turned off by pressing the power button and ensuring the LED lights are off.
Unscrew top from the container by twisting the top of the container counter clockwise and pulling up.

編集

手順2

Flip the top portion upside down and remove the wick and wick holder.
To remove the wick pull on the wick holder and it should pop right off.

編集

手順3

この手順で使用する道具：

Tweezers

$4.99

購入する

Using tweezers and or the spudging tool lift 3 small white rubber caps, pry underneath them and pull to remove them.
This reveals the three screws holding the cap in place.

編集

手順4

Unscrew and remove the 3 screws with a Philips head screwdriver. The screwdriver must be very long and thin.
Tilting the device upside down will slide the unscrewed screws out from the holes they are in after they are loosened.

編集

手順5

Homedics UHE-CMP15 Battery Replacement: 手順 5、 3の画像 3

The top portion will now be able to be removed to reveal the inside of the battery compartment.
The battery is glued to the side wall with an adhesive pad.
This battery is hardwired in, and will require skill in soldering/wiring and the ability to find a suitable replacement.