修理を始めるには コミュニティ ストア

Holmes box fan motor replacement

はじめに

This is a very simple guide that will help you dissasemble and replace the motor of your Holmes box fan, this process is easy and it only requires a screwdriver and a new motor to install.

必要な工具と部品

  1. Holmes box fan motor replacement, Motor: 手順 1、 3の画像 1 Holmes box fan motor replacement, Motor: 手順 1、 3の画像 2 Holmes box fan motor replacement, Motor: 手順 1、 3の画像 3

    • The first step is to make sure you unplug your fan from the outlet.

    • Make sure you also unplug the power cord from the back of the fan.

    翻訳

  2. Holmes box fan motor replacement: 手順 2、 2の画像 1 Holmes box fan motor replacement: 手順 2、 2の画像 2

    • Now that your fan is unplugged, lay it flat with the brand label facing upward.

    • Next is to remove the front cover.

    • Remove the six screws from the perimeter of the cover in order to remove the front cover.

    翻訳

  3. Holmes box fan motor replacement: 手順 3、 2の画像 1 Holmes box fan motor replacement: 手順 3、 2の画像 2

    • Next is the back cover.

    • Flip over the fan so you have access to these six screws.

    • Remove the six screws from the perimeter of the cover in order to remove the back cover.

    翻訳

  5. Holmes box fan motor replacement: 手順 4、 1の画像 1

    • Remove these four screws in order to remove the motor and fan blades from the housing.

    翻訳

  6. Holmes box fan motor replacement: 手順 5、 1の画像 1

    • The housing should now be able to lift away from the motor and fan blade.

    翻訳

  7. Holmes box fan motor replacement: 手順 6、 3の画像 1 Holmes box fan motor replacement: 手順 6、 3の画像 2 Holmes box fan motor replacement: 手順 6、 3の画像 3

    • The next step is to remove the mounts that held the motor to the housing.

    • Remove these four screws to remove the mounts.

    翻訳

  8. Holmes box fan motor replacement: 手順 7、 2の画像 1 Holmes box fan motor replacement: 手順 7、 2の画像 2

    • Now you are able to remove the motor from the fan blades.

    • Be careful, if you used your fan recently the motor may be quite hot.

    翻訳

  9. Holmes box fan motor replacement: 手順 8、 1の画像 1

    • Now you can insert your new motor and you are done!

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

作成者

1人の作成者と共同作成されました。

Max Cossalter

メンバー登録日: 09/29/15

311 ポイント

1ガイドが承認済み

バッジ: 7

+4 個以上のバッジ

チーム

Cal Poly, Team 15-4, Green Fall 2015 Cal Poly, Team 15-4, Green Fall 2015人のメンバー

CPSU-GREEN-F15S15G4

4 メンバー

4のガイドは作成済み

4 件のコメント

Where might one find a replacement motor for a older box fan

Chris Cook - 返信

Also, I would like to know where to get a replacement motor, as shown in step 4.

Vince Doriean - 返信

Great guide! Upon reassembling, I noticed that the center of the propeller touches the front grill where it says Holmes. Anyone know if they rub on each other by design?

Zeev - 返信

My version of the fan came with a similar cord, however the female end had a bump in the center on the end that latches into the fan. Without shaving that piece off, the plug doesn’t detach without taking it apart and prying it out.

applejack_ - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 13

過去 30 日: 54

今までの合計 12,485