メインコンテンツにスキップ

Heyday Suitcase Turntable Lever Replacement

必要な工具と部品

  1. Heyday Suitcase Turntable Lever Replacement, Baseboard: 手順 1、 1の画像 1
    • Use a Phillips #2 screwdriver to remove the four screws on each corner of the baseboard.

  2. Heyday Suitcase Turntable Lever Replacement: 手順 2、 1の画像 1
    • Use a metal spudger to pry the baseboard off of the case.

    • Be cautious of the cords and circuit located underneath the knob and the lever. Don't pull or yank the baseboard off.

  3. Heyday Suitcase Turntable Lever Replacement: 手順 3、 2の画像 1 Heyday Suitcase Turntable Lever Replacement: 手順 3、 2の画像 2
    • Disconnect the cords from the circuit board.

    • Take a picture beforehand so it's easier to put them back during reassembly.

    • Remove the baseboard.

  4. Heyday Suitcase Turntable Lever Replacement, Lever: 手順 4、 2の画像 1 Heyday Suitcase Turntable Lever Replacement, Lever: 手順 4、 2の画像 2
    • Use a Phillips #2 screwdriver to remove the screw securing the plate that covers the lever.

    • Remove the plate blocking access to the lever.

  5. Heyday Suitcase Turntable Lever Replacement: 手順 5、 1の画像 1
    • Use a Phillips #1 screwdriver to remove the plate securing the lever.

  6. Heyday Suitcase Turntable Lever Replacement: 手順 6、 1の画像 1
    • Pull the lever out of the front of the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Caroline D'Amato

メンバー登録日: 10/26/22

565 ポイント

6のガイドは作成済み

チーム

UMass Dartmouth, Team 2-1, Petersen Fall 2022 UMass Dartmouth, Team 2-1, Petersen Fall 2022人のメンバー

UMASSD-PETERSEN-F22S2G1

4 メンバー

7のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 118