メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

パーツ

パーツは指定されていません。

  1. Use a soldering iron to remove each connection between a component and the circuit board.
    • Use a soldering iron to remove each connection between a component and the circuit board.

    • For more information on how to solder and desolder connections, please visit this guide.

  2. Carefully add solder to each area where a connection will be made on the new board.  This will make it easier to actually create connections.
    • Carefully add solder to each area where a connection will be made on the new board. This will make it easier to actually create connections.

  3. Solder all of the components back onto the new board being very careful to not let any of the connections touch, which would cause more errors.
    • Solder all of the components back onto the new board being very careful to not let any of the connections touch, which would cause more errors.

  4. Make sure that the scale is working correctly with the new circuit board. If there are issues, check each connection and if they persist it may be another component depending on the issue.
    • Make sure that the scale is working correctly with the new circuit board. If there are issues, check each connection and if they persist it may be another component depending on the issue.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Travis Floyd

メンバー登録日: 2018年04月01日

506 ポイント

2のガイドは作成済み

チーム

University of Memphis, Team S1-G1, Kim Spring 2018 University of Memphis, Team S1-G1, Kim Spring 2018人のメンバー

UM-KIM-S18S1G1

3 メンバー

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 2

今までの合計 80