メインコンテンツにスキップ

Harrier Tablet by EE Disassembly

必要な工具と部品

  1. Harrier Tablet by EE Disassembly, opening the first layer: 手順 1、 3の画像 1 Harrier Tablet by EE Disassembly, opening the first layer: 手順 1、 3の画像 2 Harrier Tablet by EE Disassembly, opening the first layer: 手順 1、 3の画像 3
    • Lay the tablet on a flat surface with the screen facing downward.

    • Use a guitar pick to pry up the rear most layer of the tablet, starting by the cover of the sim card.

    • Use a spudger to pry along the edges of the back layer of the tablet. Use the guitar picks to keep the edges propped open.

  2. Harrier Tablet by EE Disassembly, getting ready for the second layer: 手順 2、 2の画像 1 Harrier Tablet by EE Disassembly, getting ready for the second layer: 手順 2、 2の画像 2
    • Before opening the second layer, use a screwdriver to remove all the screws along the edges.

    • The top left screw has an anti-tamper seal on it. Damage to this seal will void any warranties of the tablet.

  3. Harrier Tablet by EE Disassembly, sort of disassemble entirely: 手順 3、 2の画像 1 Harrier Tablet by EE Disassembly, sort of disassemble entirely: 手順 3、 2の画像 2
    • Once the screws are removed, use a spudger and guitar picks to unclip the bezel.

    • Removing the battery and flexi rigid circuit board will likely cause damage. In order to disassemble further, you may also need to replace these parts.

    • To reassemble, first remove the sim card, then follow these instructions in reverse order.

    • Make sure the buttons are properly seated before snapping the first layer back on.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

rarazzell

メンバー登録日: 07/07/18

109 ポイント

1ガイドが承認済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 6

過去 30 日: 11

今までの合計 453