この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。
はじめに
This repair guide will help you replace the on/off button for the microphone on your Harmon Kardon Invoke. By replacing the microphone on/off button, this may resolve Cortana not responding when spoken to and ensure that the microphone is enabled at the appropriate time. For this repair, make sure you have a steady hand to prevent harming the internal hardware. While replacing the base screws, be sure to not strip them, otherwise, any future repair will be difficult.
必要な工具と部品
-
-
-
Use a Torx #10 screwdriver to remove three 10.0 mm screws from the highlighted board attached to microphone button.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
チーム
Eastern Washington University, Team S2-G2, Munoz Fall 2018 Eastern Washington University, Team S2-G2, Munoz Fall 2018人のメンバー
EWU-MUNOZ-F18S2G2
3 メンバー
5のガイドは作成済み
