メインコンテンツにスキップ

はじめに

If the LED lights do not function after troubleshooting, you might need to change the LED Board. For this replacement you need a Phillips #2 screw driver and a metal spudger.

パーツ

パーツは指定されていません。

  1. Use a metal spudger to remove the top cover. Use a Phillips #2 screwdriver to remove three 17 mm screws. Use a Phillips #2 screwdriver to remove three 17 mm screws.
    • Use a metal spudger to remove the top cover.

    • Use a Phillips #2 screwdriver to remove three 17 mm screws.

  2. iPhone X用修理キット

    Warranty up? No worries, we’ve got the fix.

    ショップを見る

    iPhone X用修理キット

    Warranty up? No worries, we’ve got the fix.

    ショップを見る
  3. Grip larger cable connected to LED board and pull volume wheel until both are disconnected from the cable. Pull lightly on the LED board to disconnect the smaller LED board cable from volume wheel. Pull lightly on the LED board to disconnect the smaller LED board cable from volume wheel.
    • Grip larger cable connected to LED board and pull volume wheel until both are disconnected from the cable.

    • Pull lightly on the LED board to disconnect the smaller LED board cable from volume wheel.

まとめ

To reassemble your device, follow these instructions in reverse order.

Khalid Almutairi

メンバー登録日: 2018年10月02日

85 ポイント

1ガイドが承認済み

チーム

Eastern Washington University, Team S2-G2, Munoz Fall 2018 Eastern Washington University, Team S2-G2, Munoz Fall 2018人のメンバー

EWU-MUNOZ-F18S2G2

3 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 10

今までの合計 104