Hannspree Hannspad SN1AT71 Back Panel Replacement - iFixit 修理ガイド

はじめに

The Hannspad has a deceptive back panel that will not separate. Don't lose hope. This is not the real back panel, it is just there for aesthetics. The actual way to take the back panel off is at the seam around the edge of the screen. Follow these steps to protect your screen and easily take the back panel off your Hannspad.

必要な工具と部品

手順1 Back Panel

Hannspree Hannspad SN1AT71 Back Panel Replacement, Back Panel: 手順 1、 1の画像 1

Place the tablet screen side up.
Make sure the device is turned off to avoid damage.

手順2

Hannspree Hannspad SN1AT71 Back Panel Replacement: 手順 2、 2の画像 1

Hannspree Hannspad SN1AT71 Back Panel Replacement: 手順 2、 2の画像 2

Use the metal spudger to press an opening between the screen and back cover.
The plastic tabs are located on each corner of the back cover.
Be careful, as the plastic tabs are delicate.

手順3

Hannspree Hannspad SN1AT71 Back Panel Replacement: 手順 3、 1の画像 1

Wedge the plastic opening tool between the screen and the back panel to prevent re-engagement

手順4

Hannspree Hannspad SN1AT71 Back Panel Replacement: 手順 4、 2の画像 1

Hannspree Hannspad SN1AT71 Back Panel Replacement: 手順 4、 2の画像 2

Slide the metal spudger around the casing to separate it from the inside of the tablet.

手順5

Hannspree Hannspad SN1AT71 Back Panel Replacement: 手順 5、 2の画像 1

Hannspree Hannspad SN1AT71 Back Panel Replacement: 手順 5、 2の画像 2

Flip the tablet over so the screen side is down after all the tabs are separated.
Remove the back panel by delicately lifting it straight up.

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

作成者

9人の作成者と共同で作成されました。

matthew vandeventer

メンバー登録日: 03/11/15

920 ポイント

5のガイドは作成済み

+16 個以上のバッジ

チーム

Colorado Springs, Team 9-4, Panko Spring 2015 Colorado Springs, Team 9-4, Panko Spring 2015人のメンバー

UCCS-PANKO-S15S9G4

3 メンバー

10のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 5

今までの合計 2,309