はじめに

Replacement of the HTC Touch Pro's usb logic board.

Gently press on back plate, push toward camera direction. Gently press on back plate, push toward camera direction.
  • Gently press on back plate, push toward camera direction.

コメントを追加する

Use finger to lift up an edge of battery. Use finger to lift up an edge of battery.
  • Use finger to lift up an edge of battery.

コメントを追加する

Remove 4 screws circled in red using T6 screw driver.
  • Remove 4 screws circled in red using T6 screw driver.

コメントを追加する

Lift plastic cover near Memory card slot. Lift plastic cover near Memory card slot.
  • Lift plastic cover near Memory card slot.

コメントを追加する

Remove two Phillips #00 screws from the backside of the screen.
  • Remove two Phillips #00 screws from the backside of the screen.

コメントを追加する

Insert a spudger or plastic opening tool into the seam on the side of the phone. Gently pry apart the two halves of the phone.
  • Insert a spudger or plastic opening tool into the seam on the side of the phone.

  • Gently pry apart the two halves of the phone.

  • Work your way around the phone until the two halves separate.

コメントを追加する

Gently unplug connectors marked with blue rectangle. Remove screws circled in red with 00 Phillip screw driver.
  • Gently unplug connectors marked with blue rectangle.

  • Remove screws circled in red with 00 Phillip screw driver.

Which screws in red? There aren't any.

Calion - 返信

They are marked up in red in the second picture.

Jake Devincenzi -

Gently lift logic board using plastic opener tool. Be aware of antenna
  • Gently lift logic board using plastic opener tool.

  • Be aware of antenna

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Zhaowei Zhang

メンバー登録日: 2011年04月28日

112 ポイント

4のガイドは作成済み

チーム

CSU Los Angeles, Team 1-6, Nelson Spring 2011 CSU Los Angeles, Team 1-6, Nelson Spring 2011人のメンバー

CSULA-NELSON-S11S1G6

3 メンバー

4のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 2,899