Slide the bottom back casing off, pulling down. Slide the bottom back casing off, pulling down.
  • Slide the bottom back casing off, pulling down.

コメントを追加する

Using the plastic tool, pry underneath the top plastic cover. Using the plastic tool, pry underneath the top plastic cover.
  • Using the plastic tool, pry underneath the top plastic cover.

コメントを追加する

Using a metal spudger, pry up the plastic piece covering the motherboard, and remove the sticker. Using a metal spudger, pry up the plastic piece covering the motherboard, and remove the sticker.
  • Using a metal spudger, pry up the plastic piece covering the motherboard, and remove the sticker.

コメントを追加する

Use a Philip #0 screwdriver to remove the four screws of the plastic covering the motherboard. Use a Philip #0 screwdriver to remove the four screws of the plastic covering the motherboard.
  • Use a Philip #0 screwdriver to remove the four screws of the plastic covering the motherboard.

コメントを追加する

Using tweezers, remove the yellow ribbon by gently pulling on it.
  • Using tweezers, remove the yellow ribbon by gently pulling on it.

コメントを追加する

Using the plastic tweezers, gently lift the blue flaps up. Using the plastic tweezers, gently lift the blue flaps up.
  • Using the plastic tweezers, gently lift the blue flaps up.

コメントを追加する

Using your thumb, push the flap up on the top. Using your thumb, push the flap up on the bottom of the motherboard.
  • Using your thumb, push the flap up on the top.

  • Using your thumb, push the flap up on the bottom of the motherboard.

コメントを追加する

Using a Phillips #00 screwdriver, unscrew the four screws in each corner of the motherboard. Using a Phillips #00 screwdriver, unscrew the four screws in each corner of the motherboard.
  • Using a Phillips #00 screwdriver, unscrew the four screws in each corner of the motherboard.

コメントを追加する

Carefully remove the motherboard from the base of the phone.
  • Carefully remove the motherboard from the base of the phone.

コメントを追加する

Gently push the base of the phone from the frame. Gently push the base of the phone from the frame. Gently push the base of the phone from the frame.
  • Gently push the base of the phone from the frame.

コメントを追加する

Using the metal spudger, remove the battery from the base. Using the metal spudger, remove the battery from the base.
  • Using the metal spudger, remove the battery from the base.

コメントを追加する

Using tweezers, lift the secondary motherboard from the base of the phone. The speaker is located on the back of the board.
  • Using tweezers, lift the secondary motherboard from the base of the phone.

  • The speaker is located on the back of the board.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Kelsey Harris

メンバー登録日: 2014年10月08日

121 ポイント

1ガイドが承認済み

チーム

USF Tampa, Team 9-6, Leahy Fall 2014 USF Tampa, Team 9-6, Leahy Fall 2014人のメンバー

USFT-LEAHY-F14S9G6

3 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 2

今までの合計 250