1. Use the plastic opening tool to loosen the adhesive from the crease surrounding the screen.
    • Use the plastic opening tool to loosen the adhesive from the crease surrounding the screen.

    • The volume button is a good place to begin, it should come right out as you pry.

    コメントを追加する

  2. Wedge the plastic opening tool into the crack around the screen, on only the top, left and right sides.
    • Wedge the plastic opening tool into the crack around the screen, on only the top, left and right sides.

    • Applying heat with the iOpener or a heat gun can speed this process.

    コメントを追加する

    • Once the screen has been loosened on the top, left and right edges, lift the screen. It will remain attached at the bottom on a hinge.

    • The screen will remain attached to this hinge until the final step.

    コメントを追加する

    • Carefully remove the volume button. Loosen the back panel of the phone with the plastic opening tool. Begin loosening and prying in the space where the battery was.

    コメントを追加する

    • Once the crease has been loosened all around, pry the back panel open and lift until it can be removed.

    コメントを追加する

    • Remove tape to expose #000 screws, remove all screws.

    • Use the #000 bit screwdriver

    コメントを追加する

    • Reach beneath the motherboard with the tweezers, grip it and lift.

    • Lift with care, the motherboard is not completely disconnected yet.

    • Remove the tape connecting the motherboard to the phone and gently lift it out.

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

11 の人々がこのガイドを完成させました。

Meghan

メンバー登録日: 2014年09月23日

416 ポイント

1ガイドが承認済み

チーム

USF Tampa, Team 12-1, Blackwell Fall 2014 USF Tampa, Team 12-1, Blackwell Fall 2014人のメンバー

USFT-BLACKWELL-F14S12G1

4 メンバー

7のガイドは作成済み

Where can I buy a motherboard to do the replacement?

Askateth - 返信

Will changing the motherboard fix the pink tint in my camera?

mmm50592 - 返信

コメントを追加する

統計データを表示:

過去 24時間: 4

過去 7 日: 27

過去 30 日: 88

今までの合計 13,213