HTC Desire 610 Vibration Motor Replacement

はじめに

Has your HTC Desire 610 stopped vibrating? Follow these steps to replace the faulty vibration motor. You will learn how to take off the back, unscrew the circuit cover, unplug the vibration harness, and put in a new motor.

必要な工具と部品

手順1 Black Plastic Circuit Cover

HTC Desire 610 Vibration Motor Replacement, Black Plastic Circuit Cover: 手順 1、 3の画像 1

HTC Desire 610 Vibration Motor Replacement, Black Plastic Circuit Cover: 手順 1、 3の画像 2

HTC Desire 610 Vibration Motor Replacement, Black Plastic Circuit Cover: 手順 1、 3の画像 3

Using a plastic opening tool, take off the back cover of the phone.

編集

手順2

Remove the four black 4mm torx screws using the Torx T5 bit.

編集

手順3

Remove the four silver 5mm torx head screws using the Torx T5 screwdriver.

編集

手順4

Remove the two 2.5mm phillips head screws using the Phillips 000 screwdriver.

編集

手順5

Remove the black plastic circuit cover using a plastic opening tool.

編集

手順6 Vibration Motor

HTC Desire 610 Vibration Motor Replacement, Vibration Motor: 手順 6、 2の画像 1

HTC Desire 610 Vibration Motor Replacement, Vibration Motor: 手順 6、 2の画像 2

この手順で使用する道具：

Tweezers

$4.99

購入する

Pull the wire harness from the circuit board that is connected to the vibration motor using a pair of precision tweezers.
Be careful! Damaging this port could prevent a new vibration motor from functioning.

編集

手順7

Pry the vibration motor from it's housing using precision tweezers.
The vibration motor is held in place with adhesive, so you may need to pry a little harder to remove it.

編集