メインコンテンツにスキップ
リペアコミュニティに参加 - アカウントの作成

HP iPAQ H2200 motherbaord replacement

閲覧: 5322

統計データ:

過去24時間:
2
過去7日:
16
過去30日:
78
今までの合計
5,322
コメント: 0

このガイドにコメントを投稿した人はいません。何かコメントはありませんか?(日本語可)

修理ガイドのコメントへ
完了済み: 4

4人のユーザーがこのガイドを「完了」させました。あなたも加わりませんか?

お気に入り: 3

3人のユーザーがこのガイドをお気に入りに登録しています。あなたもリストに入れませんか?

所要時間: 15分
難易度: 中レベル
HP iPAQ H2200 motherbaord replacement

はじめに

手順 1 に進む ↓

The purpose of this guide is to instruct the reader on how to remove the main board of their HP iPAQ H2200 device.

必要な工具と部品

ツール

    1. HP iPAQ H2200 motherbaord replacement, Battery: 手順 1、 1の画像 1
      • Press and slide the battery cover tab to remove battery cover.

      FixBotに聞いてみる

      コメントを追加

    2. HP iPAQ H2200 motherbaord replacement: 手順 2、 2の画像 1 HP iPAQ H2200 motherbaord replacement: 手順 2、 2の画像 2
      • Pull on the black tab to lift the battery out of the battery compartment.

      FixBotに聞いてみる

      コメントを追加

    1. HP iPAQ H2200 motherbaord replacement, Main Board: 手順 3、 1の画像 1
      • Remove the stylus by sliding it out of the slot.

      FixBotに聞いてみる

      コメントを追加

    2. HP iPAQ H2200 motherbaord replacement: 手順 4、 1の画像 1
      • Remove the CF card by sliding it out of the slot at the top of the device.

      FixBotに聞いてみる

      コメントを追加

    3. HP iPAQ H2200 motherbaord replacement: 手順 5、 1の画像 1
      • Press down and push the black side strips toward the top of the device to remove them.

      FixBotに聞いてみる

      コメントを追加

    4. HP iPAQ H2200 motherbaord replacement: 手順 6、 3の画像 1 HP iPAQ H2200 motherbaord replacement: 手順 6、 3の画像 2 HP iPAQ H2200 motherbaord replacement: 手順 6、 3の画像 3
      • Using the T5 Torx screwdriver, remove all six screws on the back and all screws on each side of the device.

      FixBotに聞いてみる

      コメントを追加

    5. HP iPAQ H2200 motherbaord replacement: 手順 7、 2の画像 1 HP iPAQ H2200 motherbaord replacement: 手順 7、 2の画像 2
      • Remove the back faceplate by pushing and loosening the 4 side slots (2 on each side).

      FixBotに聞いてみる

      コメントを追加

    6. HP iPAQ H2200 motherbaord replacement: 手順 8、 1の画像 1
      • Open the LCD connector, where the orange strip attaches to the main board.

      FixBotに聞いてみる

      コメントを追加

    7. HP iPAQ H2200 motherbaord replacement: 手順 9、 1の画像 1
      • Carefully remove the orange LCD strip from the connector.

      FixBotに聞いてみる

      コメントを追加

    8. HP iPAQ H2200 motherbaord replacement: 手順 10、 1の画像 1
      • Unscrew the 2 screws located at each top corner of the main board.

      FixBotに聞いてみる

      コメントを追加

    9. HP iPAQ H2200 motherbaord replacement: 手順 11、 1の画像 1
      • Remove the main board by pushing outward on the two tabs located on each side near the bottom of the device.

      FixBotに聞いてみる

      コメントを追加

終わりに

To reassemble your device, follow these instructions in reverse order.

キャンセル: このガイドを終了できませんでした。

4 の人々がこのガイドを完成させました。

作成者

と共同で作成されました。

Tyler Andrews

メンバー登録日: 01/13/10

209 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 4-12, Forte Winter 2010 Cal Poly, Team 4-12, Forte Winter 2010人のメンバー

CPSU-FORTE-W10S4G12

3 メンバー

60のガイドは作成済み

0件のガイドコメント

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 16

過去 30 日: 78

今までの合計 5,322