修理を始めるには コミュニティ ストア

HP Z2 Mini G3 Access Panel Replacement

はじめに

This is the top cover to access the interior components of the HP Z2 Mini G3 (Product No. 1LE81UP#ABA). This guide can direct you to remove the panel.

Be sure to turn off the device and disconnect the A/C power cord before removing the panel.

Components inside the device are also subject to static damage, so try and work on a hard surface to reduce this risk.

  1. HP Z2 Mini G3 Access Panel Replacement, Access Panel: 手順 1、 1の画像 1

    • Turn the device so the back-side of the device is facing you.

    • Be sure that the power is off and the A/C power cord has been disconnected before starting. Removing hardware while the power is on could damage the device or harm yourself.

    • Components of the device are subject to static damage. Work on a hard, grounded surface to prevent damage to the workstation.

    編集

  3. HP Z2 Mini G3 Access Panel Replacement: 手順 2、 2の画像 1 HP Z2 Mini G3 Access Panel Replacement: 手順 2、 2の画像 2

    • Slide and hold the latch in the direction of the engraved arrow (to the right).

    編集

  4. HP Z2 Mini G3 Access Panel Replacement: 手順 3、 2の画像 1 HP Z2 Mini G3 Access Panel Replacement: 手順 3、 2の画像 2

    • While holding the latch, lift the access panel upwards and towards yourself and set it aside upside-down.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Christian Ogburn

メンバー登録日: 01/14/20

475 ポイント

3のガイドは作成済み

バッジ: 9

+6 個以上のバッジ

チーム

Embry-Riddle Aeronautical University, Team S16-G4, Branham Spring 2020 Embry-Riddle Aeronautical University, Team S16-G4, Branham Spring 2020人のメンバー

ERAU-BRANHAM-S20S16G4

3 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 8

過去 30 日: 33

今までの合計 977