HP Split x2 Rear Cover Replacement

はじめに

Do you need access to the inner components of your device? This guide instructs you how to remove the rear cover of the case. After removing the cover, the interior components such as the display, RAM and wireless card can be accessed.

必要な工具と部品

手順1 Rear Cover

HP Split x2 Rear Cover Replacement, Rear Cover: 手順 1、 1の画像 1

Opening the device voids the manufacturer warranty.
Power down the HP Split x2 before beginning the repair
Separate the tablet from the keyboard by pushing the slider to the left and lifting the tablet from the keyboard.

編集

手順2

HP Split x2 Rear Cover Replacement: 手順 2、 3の画像 3

Remove the four white caps on the bottom edge of the tablet.
Use a tweezer to grasp white caps.
The white caps are easily lost. Store them in a secure place.

編集

手順3

Use a Phillips #000 screwdriver to remove the four 3mm screws.

編集

手順4

Use a plastic opening tool to pry the tabs on the top, left and right sides of the tablet.
Only the top and sides have tabs. Remove all tabs before lifting screen.

編集