HP Pavilion ze5000 Screen Replacement

はじめに

This guide will explain how to replace the screen, assuming none of the electric connections have been damaged and the screen is the only damaged part. Some of the inner parts have sharp, metal corner and minor injury can occur if you rush through the guide.

必要な工具と部品

手順1 Screen

HP Pavilion ze5000 Screen Replacement, Screen: 手順 1、 3の画像 1

HP Pavilion ze5000 Screen Replacement, Screen: 手順 1、 3の画像 2

HP Pavilion ze5000 Screen Replacement, Screen: 手順 1、 3の画像 3

Remove two 5.0 mm Philips #0 screws on the hinge of the device

編集

手順2

Using tweezers, gently pull on the hinges to remove the plastic case connected to the hinges

編集

手順3

HP Pavilion ze5000 Screen Replacement: 手順 3、 3の画像 3

Remove the connection between the plastic case and interior of the device

編集

手順4

HP Pavilion ze5000 Screen Replacement: 手順 4、 3の画像 3

Remove the connection from the exposed hinge and interior of the device

編集

手順5

Remove the 3.5 mm philips #00 screw on the small circuit board on the hinge

編集

手順6

Remove the 5.0 mm philips #0 screw that was hidden underneath the small circuit board

編集

手順7

Remove the 6 plastic caps located in the four corners of the screen and the top of the screen
It may be easier to use tweezers for this part

編集

手順8

HP Pavilion ze5000 Screen Replacement: 手順 8、 3の画像 3

Unscrew the six 5.0 mm Philips #0 screws underneath the caps

編集

手順9

HP Pavilion ze5000 Screen Replacement: 手順 9、 3の画像 3

Using a spudger, pry the plastic casing off of the screen.

編集

手順10

HP Pavilion ze5000 Screen Replacement: 手順 10、 3の画像 3

Remove four 5.0 mm Philips #0 screws located in the corners of the screen
These screws locations will be close to the screws locations in step 2.
During reassembly, make sure you do not confuse the proper screw placements from this step and step 4.