HP Pavilion x360 14m-cd0003dx Screen Replacement

はじめに

This guide helps you with removal and replacing the Screen for HP Pavilion x360 14m-cd0003dx laptop. If your computer powers on, but you see a blank screen or glitches, the screen may need to be replaced.

For further information to determine if the Screen needs to be replaced, please refer to this troubleshooting guide.

必要な工具と部品

手順1 Screen

HP Pavilion x360 14m-cd0003dx Screen Replacement, Screen: 手順 1、 1の画像 1

Turn off the computer.
Disconnect the power cord and any external devices connected to the computer.
Make sure the device is completely turned off or else you may risk injury through electric shock.

翻訳

手順2

Use a plastic opening tool to carefully separate the screen from the plastic frame.
Work along the top first, and then down the left and right sides.

翻訳

手順3

The screen can then be separated from the frame and laid flat on top of the keyboard.
Do not pull and try to remove yet, as the screen is still connected by several cables.

翻訳

手順4

The next few steps involve disconnecting the screen from the laptop in several places.
The first place is connected to the left side of the thin blue board at the top.
Peel back the clear adhesive and remove the pin header from the port on the blue board.

翻訳

手順5

The next place is underneath the gray adhesive. Peel back this adhesive to expose the connection underneath.
Disconnect the gold pin header from its port.

翻訳

手順6

Repeat Step 4 for the connection on the right side.
Peel the clear adhesive and remove connection.

翻訳

手順7

HP Pavilion x360 14m-cd0003dx Screen Replacement: 手順 7、 3の画像 3

Peel the thin gray adhesive strips.
Pull out the thin black cable underneath these strips. It is the same black cable that was disconnected in the previous steps.

翻訳