はじめに

If your hard drive is not working or you want to add in a larger hard drive, follow this guide.

  1. Remove the two screws from the hard drive shield and lift it off starting at the right side.  The screws will remain in the shield. Remove the two screws from the hard drive shield and lift it off starting at the right side.  The screws will remain in the shield.
    • Remove the two screws from the hard drive shield and lift it off starting at the right side. The screws will remain in the shield.

  2. Pull the plastic tab attached to the hard drive. The hard drive lifts right out.  Pull gently so you don't damage the contacts. Pull the plastic tab attached to the hard drive. The hard drive lifts right out.  Pull gently so you don't damage the contacts.
    • Pull the plastic tab attached to the hard drive. The hard drive lifts right out. Pull gently so you don't damage the contacts.

  3. Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

    当社のショップを閲覧する
  4. Now you have your hard drive out! Now you have your hard drive out!
    • Now you have your hard drive out!

  5. Gently pull forward the HP adapter from the top of the hard drive. Insert the adapter onto the new SATA hard drive, to be replaced in the laptop.
    • Gently pull forward the HP adapter from the top of the hard drive.

    • Insert the adapter onto the new SATA hard drive, to be replaced in the laptop.

まとめ

To reassemble your device, follow these instructions in reverse order.

15 の人々がこのガイドを完成させました。

Ben Hirsch

メンバー登録日: 2010年10月05日

3,670 ポイント

10のガイドは作成済み

チーム

Cal Poly, Team 21-33, Regan Fall 2010 Cal Poly, Team 21-33, Regan Fall 2010人のメンバー

CPSU-REGAN-F10S21G33

4 メンバー

10のガイドは作成済み

thanks for your help

moyguens - 返信

I was scratching my head when I recvd the new hd w/out the adapter... LOL! thanks

gilaraujog - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 24

過去 30 日: 116

今までの合計 35,619