はじめに

The random access memory (RAM) stores temporary data for programs to use while they are running. Some programs use a lot of memory so it may be useful to replace RAM with ones with more memory on them.

パーツ

パーツは必要ありません。

  1. Locate the battery on the bottom side of the laptop.
    • Locate the battery on the bottom side of the laptop.

    • Slide the release switch and the battery will pop out.

    • Remove the battery

    コメントを追加する

  2. Using the Phillips #1, loosen the three 7mm captive screws that secure the memory module cover to the computer.
    • Using the Phillips #1, loosen the three 7mm captive screws that secure the memory module cover to the computer.

    コメントを追加する

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove cover and expose the memory module by lifting the cover up like its on a hinge.

    コメントを追加する

    • Locate the release tabs on both sides of the RAM.

      • Use non-conductive pointing tool or fingers to prevent static build up and damaging components.

    • Pull the metal tabs away from the memory to release it.

    • Pull RAM away from clips to remove from device

      • Repeat for second RAM if necessary

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Chad

メンバー登録日: 2014年01月13日

949 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team 10-34, Maness Winter 2014 Cal Poly, Team 10-34, Maness Winter 2014人のメンバー

CPSU-MANESS-W14S10G34

4 メンバー

6のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 11

今までの合計 1,238