はじめに

How to remove the Wi-Fi Card

パーツ

パーツは必要ありません。

  1. Begin by turning the laptop over so that you can see the bottom of the computer.
    • Begin by turning the laptop over so that you can see the bottom of the computer.

  2. Slide the battery release switch to the right while simultaneously lifting up the battery.
    • Slide the battery release switch to the right while simultaneously lifting up the battery.

  3. Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

    当社のショップを閲覧する
  4. Unscrew the 2 screws from the plate that cover the Wi-Fi card. Remove the cover.
    • Unscrew the 2 screws from the plate that cover the Wi-Fi card.

    • Remove the cover.

  5. Disconnect these 2 antenna wires (which eventually connect to the monitor) from the Wi-Fi card. For reassembly, note where the black and white cables connect to the card.
    • Disconnect these 2 antenna wires (which eventually connect to the monitor) from the Wi-Fi card.

    • For reassembly, note where the black and white cables connect to the card.

    • Release the Wi-Fi card from the laptop by pressing the metal hinges on either end of it.

    • Gently remove the card from laptop.

まとめ

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Shantel

メンバー登録日: 2010年04月20日

470 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team 30-37, Garner Spring 2010 Cal Poly, Team 30-37, Garner Spring 2010人のメンバー

CPSU-GARNER-S10S30G37

4 メンバー

6のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 4

今までの合計 5,103