HP Pavilion TouchSmart 14z-n100 Keyboard Replacement

はじめに

Follow this guide to replace the keyboard on a HP Pavilion TouchSmart 14z-n100. You will need a number 1 Phillips screwdriver, a plastic spudger and a replacement keyboard.

必要な工具と部品

手順1 Keyboard

HP Pavilion TouchSmart 14z-n100 Keyboard Replacement, Keyboard: 手順 1、 1の画像 1

Remove these two, 4 mm long number 1 Phillips screws from the device.

編集

手順2

Gently pull the keyboard up with a small plastic opening tool, beginning toward the front right corner. Just pull the keyboard up enough to fit your fingers under.

編集

手順3

Gently pull the keyboard up with your fingers. Do not pull the keyboard too far from the computer.

編集

手順4

HP Pavilion TouchSmart 14z-n100 Keyboard Replacement: 手順 4、 3の画像 3

Lift the plastic retaining tab with a small plastic opening tool. The tab will rotate to the side but not remove from the laptop. After this gently pull the wire ribbon to remove it. The old keyboard is now completely removed.

編集