HP Laserjet Pro 200 Color MFP Power Button Replacement

はじめに

Is your HP Laserjet Pro 200 not turning on? Then there may be an issue with the power button. This guide demonstrates how to quickly replace the power button inside your printer. All you need is a Phillips #2 Screwdriver, iFixit Opening Tool, and Metal Spudger!

必要な工具と部品

手順1 Power Button

HP Laserjet Pro 200 Color MFP Power Button Replacement, Power Button: 手順 1、 2の画像 1

HP Laserjet Pro 200 Color MFP Power Button Replacement, Power Button: 手順 1、 2の画像 2

Turn the printer so that the front is facing to your left.
Flip the printer so that it is laying with its left side facing down and the bottom facing you.

翻訳

手順2

Use a #2 Phillips head screwdriver to unscrew the 8mm screw on the top edge of the printer.

翻訳

手順3

HP Laserjet Pro 200 Color MFP Power Button Replacement: 手順 3、 3の画像 3

There are three tabs along the back right corner of the printer underneath the panel (location is displayed in the second picture).
Use a flathead screwdriver to depress the tabs while lightly pulling the panel towards you.
Begin with the upmost tab and move your way down, individually depressing the tabs.
Pull the panel towards you and remove it from the printer.

翻訳

手順4

Turn the printer so that you are facing the open side with the power button chord.
Carefully remove this cord.

翻訳

手順5

HP Laserjet Pro 200 Color MFP Power Button Replacement: 手順 5、 3の画像 3

There is a cover that protects the electronics within the power button.
Remove it by pinching the two tabs on the cover.
Pull it outward from the printer.

翻訳

手順6

A tension spring in the form of a bent wire is used to hold the assembly in the printer.
In order to remove the spring completely, begin by removing the right end of the wire from it's slot above the power button with a metal spudger.

翻訳

手順7

Unclip the left side of the wire from printer by applying upwards pressure along the edge of the wire.
This step can be done with either your fingers or a prying tool of your choosing.

翻訳