修理を始めるには コミュニティ ストア

HP Laserjet Pro 200 Color MFP Toner Cartridge Drawer Replacement

はじめに

Is your HP Laserjet Pro 200 toner cartridge drawer jammed or broken? If so, this guide demonstrates how to quickly replace the toner cartridge drawer in your printer. All you need is a Phillips #2 Screwdriver and iFixit Opening Tool!

必要な工具と部品

  1. HP Laserjet Pro 200 Color MFP Toner Cartridge Drawer Replacement, Toner Cartridge Drawer: 手順 1、 1の画像 1

    • Open the front cover by grasping the edge and pulling it outwards.

    翻訳

  2. HP Laserjet Pro 200 Color MFP Toner Cartridge Drawer Replacement: 手順 2、 1の画像 1

    • Pull out the toner cartridge drawer by using the handle as shown.

    翻訳

  3. HP Laserjet Pro 200 Color MFP Toner Cartridge Drawer Replacement: 手順 3、 1の画像 1

    • Use the handles built into the toner cartridges to remove them by pulling straight upwards.

    • Remove all 4 toner cartridges.

    • Each toner cartridge has a specific place depending on color. The right locations for each cartridge can be found by looking at the colored stickers on the right side of the drawer. This is important to note for reassembly.

    翻訳

  5. HP Laserjet Pro 200 Color MFP Toner Cartridge Drawer Replacement: 手順 4、 2の画像 1 HP Laserjet Pro 200 Color MFP Toner Cartridge Drawer Replacement: 手順 4、 2の画像 2

    • There are 2 locks on the inner walls of the sides of the printer which need to be removed in order to have access to the toner drawer.

    • Use the opening tool or a small flathead screwdriver to depress the small button on the inside of the lock. This button keeps the lock from moving.

    • The second picture shows what these lock assemblies look like.

    翻訳

  6. HP Laserjet Pro 200 Color MFP Toner Cartridge Drawer Replacement: 手順 5、 3の画像 1 HP Laserjet Pro 200 Color MFP Toner Cartridge Drawer Replacement: 手順 5、 3の画像 2 HP Laserjet Pro 200 Color MFP Toner Cartridge Drawer Replacement: 手順 5、 3の画像 3

    • While continuing to depress the button, use your finger to grab ahold of the lock.

    • Push it forwards into the printer and maintain pressure on the lock.

    • Pivot the back end of the lock away from the inner wall of the printer and towards you until it pops out.

    翻訳

  7. HP Laserjet Pro 200 Color MFP Toner Cartridge Drawer Replacement: 手順 6、 1の画像 1

    • Repeat steps 4 and 5 for the lock on the opposite side of the printer.

    翻訳

  8. HP Laserjet Pro 200 Color MFP Toner Cartridge Drawer Replacement: 手順 7、 1の画像 1

    • Pull out the faulty ink cartridge drawer and replace it with a functioning drawer.

    翻訳
終わりに

To reassemble your device, follow the instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

5人の作成者と共同で作成されました。

Kendall Gentzen

メンバー登録日: 04/18/19

981 ポイント

5のガイドは作成済み

バッジ: 12

+9 個以上のバッジ

チーム

Cal Poly, Team S9-G14, Maness Spring 2019 Cal Poly, Team S9-G14, Maness Spring 2019人のメンバー

CPSU-MANESS-S19S9G14

4 メンバー

11のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 13

過去 30 日: 67

今までの合計 4,376